The VW3E1150R080 is a shielded hybrid cable from the PacDrive 3 range, purpose-built to run between a Lexium 62 ILM distribution box (connector type D0, straight shape) and the ILM integrated drives (connector type D2, elbowed shape). At 8 meters (26.2 ft), it's a common length for connecting a drive cabinet to motors spaced across a machine frame — enough reach for most single-axis cells without coiling excess slack in the wireway.
That shielding matters out here in the grease. On a rotating-equipment line, unshielded motor cable running alongside sensor leads picks up enough EMI to ghost an encoder count or trip a drive fault. This one carries the shield bonded through both connector ends, so the ground path stays continuous from the distribution box right to the drive — no separate drain wire to terminate at the panel gland plate.