The VW3E2097R100 is an incremental master encoder cable from the Schneider Electric PacDrive 3 range, purpose-built for the LMC Eco motion controller. It carries the encoder feedback signal between the controller and the motor drive over a 10 m (32.8 ft) cable with an M23 connector at one end and an RJ45 at the other — the standard interface for PacDrive 3 encoder ports.
The 10 m (32.8 ft) length is the working span from controller to motor — long enough for most cabinet-to-machine runs but short enough to avoid signal degradation on incremental encoder lines. The M23 connector is a rugged circular industrial type, while the RJ45 plugs into the standard PacDrive 3 encoder port on the LMC Eco. UL listing means it meets North American code requirements for panel wiring.