The Schneider VW3L2M001R200 is a pre-assembled cable kit for the I/O interface used in motion sequence applications. It runs 20 m (65.6 ft) from a printed circuit board connector on the drive side to an open end at the field device, with an integrated cable entry and strain relief built into the connector housing.
What the 20 m length means for your cabinet layout
At 20 m, this cable kit covers the distance from a drive mounted inside a control cabinet to a remote I/O block or encoder on the machine frame. The integrated strain relief at the drive connector end means you don't need a separate cable gland or tie-down point at that interface — one less part to spec and one less hole in the panel gland plate. The open end at the field side lets you terminate directly into the terminal block of the receiving device, which keeps the wiring path clean and avoids a junction box mid-run.