What this cable kit connects and why it matters
The Schneider VW3L2T001R30 is a pre-assembled cable kit that bundles both the Modbus TCP fieldbus connection and the drive power supply into one harness, saving a panel builder from running two separate cables to the drive. It runs 3 m (9.8 ft) — a common reach from a cabinet-mounted drive to a nearby junction or controller — and terminates with a printed circuit board connector on the drive end, an RJ45 for the fieldbus, and an open SUB-D 9 for the power supply. The integrated cable entry with strain relief means the cable is protected where it enters the connector housing, which is the first place vibration kills a fieldbus link on a conveyor or pump drive.
Fit: which drives and what the connectors mean
This kit is designed for drives that use printed circuit board connectors for both the power supply and the fieldbus interface — the PCB connector on the drive end mates directly to the drive's header. The RJ45 fieldbus connector handles the Modbus TCP link; the open SUB-D 9 end is for the power supply wiring, which you terminate in the panel or to a power source. If you are wiring a drive that expects a separate power cable and a separate Ethernet patch cord, this kit replaces both with one assembly — fewer cable glands, less clutter on the DIN rail.