The VW3L2U001R150 is a pre-assembled cable kit from Schneider Electric, purpose-built for connecting drives with a printed circuit board connector to a pulse/direction interface. The 15 m cable comes with an integrated cable entry and strain relief, so it's ready to route through a gland plate without adding a separate fitting. This is a connection accessory, not a fieldbus or encoder cable — it carries the pulse/direction signals that position a servo or stepper drive.
What the 15 m cable length means for fit
At 15 m, this cable covers the typical distance from a drive cabinet to a motor-mounted encoder or resolver on a medium-sized machine cell. The printed circuit board connector on the drive end mates directly to the drive's pulse/direction port; the cable end is open, so you terminate it at the motor-side device. The integrated strain relief at the cable entry keeps the connection from pulling loose during vibration — a detail that matters on a conveyor or packaging line where the cable sees flex.