The VW3L3M01R30 is a pre-wired connector cable from Schneider Electric, terminated with a 4-pin crimp connector on the motor interface side and left open on the other end. It is a connection accessory specifically intended for stepper motor drives. Cable length is 9.8 ft (3 m), which covers the typical distance from a drive mounted in a cabinet to a stepper motor on the frame or conveyor. The open cable end lets you terminate directly into the motor's terminal box or a field-installed connector, avoiding an extra junction point.
The VW3L3M01R30 carries an active product status from Schneider Electric. It is a mature line item, meaning supply is stable and the design is proven.
Connector detail and field termination
The motor-side connector uses a wire-crimp 4-pin arrangement. The other end is unterminated — stripped and tinned or left for the installer to fit a gland or circular connector matching the motor's inlet. This avoids carrying a second custom cable assembly for the field run. Because the cable is pre-wired on one end only, pin-to-pin continuity is guaranteed from the drive connector to the open end. No need to break into the molded boot to check wiring; just land the open end per the drive's output phase and brake wiring diagram.