Skip to main content
Log in
Schneider Electric VW3L3M02R30 — Motor Control Accessories

Schneider VW3L3M02R30 Lexium SD2 motor cable, 3 m, discontinued

MPNVW3L3M02R30
Obsolete

Schneider Electric Lexium SD2 VW3L3M02R30 pre-wired connector with cable end open, 3 m, 4-pin motor interface, for stepper motor drives SD218PU20C, SD218AU20C, SD215DU20C.

$105.68Ref. price · indicative, final on quote
Schneider Electric VW3L3M02R30 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

VW3L3M02R30 — Identification
ParameterValue
Product / component typePre-wired connector with other cable end open
Accessory categoryConnection accessories
Accessory typeCable
Destination / intended useFor stepper motor drive
VW3L3M02R30 — Cable & Connector
ParameterValue
Cable length9.8 ft (3 m)
Electrical connection1 connector wire crimp, 4 pins motor interface Cable end open

Product details

Overview

The VW3L3M02R30 is a Schneider Lexium SD2 pre-wired connector cable, 3 m long, with a 4-pin wire-crimp connector on one end and an open cable end on the other, designed for the motor interface of compatible stepper drives. It is compatible with the SD218PU20C, SD218AU20C, and SD215DU20C drives, and has been discontinued since 2020-11-01.

Schneider discontinued the VW3L3M02R30 on 2020-11-01. An RFQ confirms current availability and lead time.

The VW3L3M02R30 uses a 4-pin motor interface connector, while the VW3L3M01R30 uses a 4-pin motor interface connector as well, but is compatible with SD218AU50C, SD215DU50C, and SD218PU50C drives. Both are 3 m cables; the difference is the target drive series — the VW3L3M02R30 fits the 20C suffix drives, the VW3L3M01R30 fits the 50C suffix drives.

MPN
VW3L3M02R30