What this cable does on a CANopen line
The VW3M94CAN45R10 is a 10 m CANopen connecting cable that links a Lexium 32i servo drive to the bus network. One end is a straight RJ45 male (A-coded, 5-way) for the bus IN port; the other is an M12 female connector that mates to the drive's CANopen interface. Per the datasheet, the 10 m length covers the typical distance between a drive cabinet and a remote junction box or daisy-chain node without exceeding the CANopen segment limit.
Connector detail for panel integration
The RJ45 male connector is A-coded with 5 ways, straight orientation, intended for the bus IN port on the drive or upstream node. The M12 female connector is the field-side termination. Both ends are factory-molded; no field wiring or termination is required. The cable jacket is suitable for fixed installation within a control cabinet or in light industrial environment routing — no continuous flex rating is stated, so avoid dynamic-bend applications.