The WB1GA095 is a replacement coil for Schneider TeSys CV1B and CV3B contactors, rated 110 V AC at 60 Hz. It's a low-consumption coil — inrush pulls 130...165 W (370...475 VA at 60 Hz), and hold-in drops to 19...30 W (50...75 VA). The coil resistance sits at 5.29 Ω at 68 °F (20 °C), and the closed-circuit inductance measures 0.41 H. It's part of the TeSys range, Schneider's workhorse contactor and motor-starter family common across industrial control panels worldwide.
The 110 V AC 60 Hz control voltage is specific — it's not a 50/50 dual-frequency coil. The operational limits are 0.85...1.1 Uc at 60 Hz (93.5...121 V AC), so if your control transformer sags under load, verify it stays above 93.5 V. The low-consumption design means less heat in the panel and a smaller control transformer burden compared to older coil types.