Schneider Electric TeSys range, contactor coil WB1HA082, 80 V AC 50 Hz / 90 V AC 60 Hz, obsolete.
| Parameter | Value |
|---|---|
| Product range | TeSys |
| Product or component type | Contactor coil |
| Parameter | Value |
|---|---|
| Control circuit voltage [Uc] | 80 V AC 50 Hz 90 V AC 60 Hz |
| Control circuit type | AC |
| Control circuit voltage limits | Operational: 0.85...1.1 Uc at 50 Hz (at Operational: 0.85...1.1 Uc at 60 Hz (at <131 °F (55 °C)) |
| Parameter | Value |
|---|---|
| Inrush power in | 150...280 W 68 °F (20 °C) |
| Average resistance | 2.61 Ohm 68 °F (20 °C) |
The WB1HA082 is a contactor coil from the Schneider Electric TeSys range, designed to replace the coil in CV1B and CV3B contactors.
At 68 °F (20 °C), the coil draws an inrush power of 150 to 280 W and has an average resistance of 2.61 Ohm. The operational voltage limits are 0.85 to 1.1 times the rated control circuit voltage (Uc) at both 50 Hz and 60 Hz, up to an ambient temperature of 131 °F (55 °C).
The evidence does not list an official successor or pin-compatible alternative. For a direct replacement, sourcing the exact WB1HA082 through the surplus channel is the only option. A panel builder would need to verify coil voltage and mounting for any substitute contactor coil.