Skip to main content
Log in
Schneider Electric XCK T2102G11 — Limit Switches

Telemecanique XCK T2102G11 Limit Switch, 240V 3A, IP66/67

MPNXCK T2102G11

Telemecanique Osiswitch XCK T2102G11 compact limit switch, 240 VAC 3 A, 1NO-1NC, steel roller plunger, PG11 cable gland, IP66/IP67.

$112.59Ref. price · indicative, final on quote
Schneider Electric XCK T2102G11 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

XCK T2102G11 key specifications
ParameterValue
Actuator head typeSTEEL TOP ROLLER PLUNGER
Voltage max240 V
Current_max3 A
Enclosure_typeNEMA 1/2/4/6/12/13, IP66, IP67
Enclosure_materialWIDE PLASTIC
Connector_typePG11 CABLE GLAND/SCREW CLAMP TERMINAL
Operating temperature high-13 TO 158 DEG F
Dimensions_text58 X 50 X 30 mm
StandardsUL 508, CSA C22.2
IP ratingIP66 IP67
Output signal1 NC + 1 NO
Contact form1NO-1NC

All specifications

XCK T2102G11 additional specifications
ParameterValue
Product typeCOMPACT, MODULAR
Actuationroller plunger
Operation_typeSNAP ACTION
Contact rating10
Contact_operationSnap action
Operating_force_n318 LB-INCH
Differential travel1.5
Temp operating range{'max': 70, 'min': -25, 'unit': '°C'}

Product details

Limit switch for washdown and outdoor positions

The Telemecanique XCK T2102G11 is a compact limit switch from the Osiswitch family, built for environments where water ingress is a real risk. Its IP66 and IP67 ratings mean the housing and the PG11 cable gland entry both seal against hose-directed water and temporary submersion — a common spec on food-processing lines, car-wash bays, and outdoor conveyor transfers. The steel roller plunger actuator (top-mounted, snap-action) gives positive mechanical registration on cam tracks or slide gates; the 1NO-1NC contact block, rated 3 A at 240 VAC, is enough for pilot-duty control circuits feeding a PLC input or a contactor coil.

Panel fit and wiring note

The body measures 58 x 50 x 30 mm — a standard compact footprint that fits into the same cutout as other XCK-T series switches. The PG11 cable gland accepts a 6–12 mm cable; internal screw-clamp terminals land 0.5–2.5 mm² stranded wire.

Frequently asked questions

What is the IP rating and what does it mean for installation?

IP66 and IP67. IP66 means the switch is protected against powerful water jets (hose-down), and IP67 means it withstands temporary immersion up to 1 meter for 30 minutes. This makes it suitable for outdoor or washdown environments like food processing lines or car washes.

What approvals does this limit switch carry?

UL 508 and CSA C22.2. These are North American safety standards for industrial control equipment — the switch is listed for use in panels that require UL or CSA marking.

What is the contact configuration and electrical rating?

1NO-1NC (one normally open, one normally closed) snap-action contacts, rated 3 A at 240 VAC. The NC contact is typically used in safety circuits for positive-break monitoring.

Will XCK T2102G11 drop into a panel specified around XCKT2102G11 without rewiring?

Yes — XCKT2102G11 is the same part under a different order code format (no dash). The dimensions, actuator, contact block, and PG11 gland are identical. No rewiring or panel modification is needed.

MPN
XCK T2102G11