Skip to main content
Log in
Schneider Electric XCKJ10553 — Limit Switches

XCKJ10553 Square D XCKJ10555 Heavy Duty Limit Switch, 240 VA

MPNXCKJ10553

Square D (Telemecanique) XCKJ10553 heavy duty limit switch, non-plug-in, SPDT, 240 VAC 10 A / 250 VDC 0.27 A, NEMA 1/2/4/12, IP66, rotary head with metal round rod lever.

$54.61Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

XCKJ10553 key specifications
ParameterValue
TypeHeavy Duty, Non-Plug-In
Operation typeSpring Return, Snap Action
Connection typePG13.5 Cable Gland/Screw Clamp Terminal
Actuator (Head type)Rotary Head, Metal Round Rod Lever
Contact configurationSPDT
EnclosureNEMA 1/2/4/12, IP66
Operating temperature-13 to 158 Deg F
Body materialZamak Zinc Alloy
ApprovalUL, CSA
ModelXCKJ
CategoryHeavy Duty Limit Switches
Pretravel23 Deg

All specifications

XCKJ10553 additional specifications
ParameterValue
Sub-CategoryGeneral/Heavy Duty Limit Switch
Total travel90 Deg
Contact rating240 VAC 10 Ampere, 250 VDC 0.27 Ampere
Operating force33.3 Oz-Inch
Manufacturer brandSquare D Co.
Differential travel11 Deg
Product descriptionTelemecanique XCKJ10553 Limit Switch 240Vac 10Amp Xckj +Options
Additional informationApplicable Standard EN/IEC 60204-1, EN/IEC 60947-5-1
Full technical descriptionHeavy Duty, Non-Plug-in Type; SPDT Contact Configuration; PG13.5 Cable Gland/Screw Clamp Terminal Connection Type; Spring Return, Snap Action Operation Type; 240 VAC 10 Ampere, 250 VDC 0.27 Ampere Contact Rating; UL, CSA Approval; NEMA 1/2/4/12, IP66 Enclosure; Zamak Zinc Alloy Body Material; -13 to 158 Deg F Operating Temperature; 33.3 oz-Inch Operating Force; 11 Deg Differential Travel; Rotary Head, Metal Round Rod Lever Actuator/Head Type; 23 Deg Pretravel; 90 Deg Total Travel; Applicable Standard En/Iec 60204-1, En/Iec 60947-5-1; XCKJ Model
Proposition 65 warningWARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Product details

The Square D (Telemecanique) XCKJ10553 is a heavy duty, non-plug-in limit switch from the XCKJ series. It carries a SPDT contact configuration rated 240 VAC 10 Ampere and 250 VDC 0.27 Ampere — the AC rating handles typical motor or solenoid loads in a control panel, while the DC rating is low-current, suitable for signal-level switching or small DC relay coils. Enclosure is NEMA 1/2/4/12 and IP66, so it's sealed against hose-down and dust ingress — fine for washdown zones or outdoor cabinets. The body is Zamak zinc alloy, rotary head with a metal round rod lever, pretravel 23 degrees, total travel 90 degrees, differential travel 11 degrees. Operating force is 33.3 oz-in. Connection is via PG13.5 cable gland with screw clamp terminals — no plug-in base, so wiring is permanent. Operating temperature range -13 to 158 deg F.

Compliance & Approvals

UL and CSA approved. Applicable standards include EN/IEC 60204-1 and EN/IEC 60947-5-1. No RoHS or REACH statement is provided in the listing; the Proposition 65 warning for DINP and DIDP applies for California.

Frequently asked questions

What are the key ratings for XCKJ10553?

SPDT contacts rated 240 VAC 10 Ampere and 250 VDC 0.27 Ampere. Enclosure NEMA 1/2/4/12, IP66. Operating temperature -13 to 158 deg F.

What approvals does XCKJ10553 carry?

UL and CSA. Complies with EN/IEC 60204-1 and EN/IEC 60947-5-1.

MPN
XCKJ10553