What XCKP2106G11 is and where it gets specified
It sits in the General Duty Limit Switch line, plastic-bodied, UL and CSA approved, and built around EN/IEC 60204-1 and EN/IEC 60947-5-1 conformance for industrial control gear.
How the enclosure rating reads against wet-site service
The switch is rated NEMA 1, 2, 4, 6, 6P, 12 and 13 plus IP66 and IP67 — meaning the body is sealed against hose-down, temporary immersion (6P), and oil/coolant intrusion typical of machine-shop and washdown areas, but the plastic housing remains the limiting factor in chemical exposure. Operating temperature spans -13 to 158 °F, so the actuator and snap mechanism are specified for unheated outdoor cabinets and indoor process cells alike; the upper end caps typical panel-side ambient rather than a digester head space.
Cat whisker actuator and snap-action behaviour
The cat whisker actuator carries 20° pretravel and 15° differential travel, with snap-action contact transfer — the snap mechanism makes the transition regardless of actuator speed, which is what gives the switch its repeatable position signal for PLC inputs on moving cams. PG11 cable gland entry with screw-clamp terminals keeps wiring service-friendly in the field: the gland takes a standard cable OD range and the clamp terminals accept ring or fork lugs without specialised tooling.
Lifecycle status and how to source it
Lifecycle is recorded as current, and the order code is held as an active line in the XCKP compact series — quoted against the BOM line rather than off the shelf, with availability and current pricing confirmed when an RFQ is submitted.