Skip to main content
Log in
Schneider Electric XCMD2110C12 — Limit Switches

Square D XCMD2110C12 Limit Switch, 240VAC 1.5A, IP66/67/68,

MPNXCMD2110C12

Square D / Telemecanique Osiswitch XCMD, heavy duty miniature modular limit switch, 240VAC 1.5A / 250VDC 0.1A, 1NO-1NC snap action, top push rod plunger, M12 5-pin male connector, NEMA 1/2/4/4X/6/12/13 IP66 IP67 IP68, UL CSA.

$84.59Ref. price · indicative, final on quote
Schneider Electric XCMD2110C12 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

XCMD2110C12 key specifications
ParameterValue
TypeHEAVY DUTY, MINIATURE, MODULAR
Operation typeSNAP ACTION
Connection typeM12, 5 PIN MALE CONNECTOR
Actuator (Head type)TOP PUSH ROD PLUNGER
Contact configuration1NO-1NC
EnclosureNEMA 1/2/4/4X/6/12/13, IP66, IP67, IP68
Operating temperature-13 TO 158 DEG F
Body materialZAMAK[R] ZINC ALLOY
ApprovalUL, CSA
ModelXCMD
CategoryMiniature & Snap Action Limit Switches
Pretravel1.8 MM

All specifications

XCMD2110C12 additional specifications
ParameterValue
Sub-CategoryGeneral/Heavy Duty Limit Switch
Total travel5 MM
Contact rating240 VAC 1.5 AMPERE, 250 VDC 0.1 AMPERE
Operating force9.55 LB
Manufacturer brandSquare D Co.
Differential travel0.8 MM
Product descriptionTelemecanique XCMD2110C12 Limit Switch 240Vac 1.5A Metal Xcmd
Additional informationAPPLICABLE STANDARD EN/IEC 60204-1, EN/IEC 60947-5-1
Full technical descriptionHeavy Duty, Miniature, Modular Type; 1NO-1NC Contact Configuration; M12, 5 Pin Male Connector Connection Type; Snap Action Operation Type; 240 VAC 1.5 Ampere, 250 VDC 0.1 Ampere Contact Rating; UL, CSA Approval; NEMA 1/2/4/4X/6/12/13, IP66, IP67, IP68 Enclosure; ZAMAK[R] Zinc Alloy Body Material; -13 to 158 Deg F Operating Temperature; 9.55 lb Operating Force; 0.8 mm Differential Travel; Top Push Rod Plunger Actuator/Head Type; 1.8 mm Pretravel; 5 mm Total Travel; OSISWITCH[R] Brand; Applicable Standard En/Iec 60204-1, En/Iec 60947-5-1; XCMD Model
Proposition 65 warningWARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Product details

The Square D / Telemecanique XCMD2110C12 is a heavy-duty miniature modular limit switch from the Osiswitch line, built for environments where washdown, submersion, and corrosive atmospheres are routine. Its ZAMAK zinc-alloy body and NEMA 1/2/4/4X/6/12/13 plus IP66, IP67, and IP68 enclosure ratings mean it survives direct hose spray, temporary immersion, and continuous dust ingress — a common spec for food-and-beverage, chemical processing, and outdoor material-handling positions. The top push-rod plunger actuator gives a straightforward vertical-stroke detection with 1.8 mm pretravel and 5 mm total travel, so it registers a positive open/close on the 1NO-1NC snap-action contact set. Contact rating is 240 VAC at 1.5 A and 250 VDC at 0.1 A. The DC rating is signal-level (0.1 A), so verify any inductive load inrush against that limit.

Approvals include UL and CSA. The switch references EN/IEC 60204-1 and EN/IEC 60947-5-1.

Frequently asked questions

What is the contact rating of the XCMD2110C12?

The contact rating is 240 VAC at 1.5 A and 250 VDC at 0.1 A. The DC rating is signal-level (0.1 A), so verify any inductive load inrush against that limit.

What enclosure ratings does the XCMD2110C12 carry?

NEMA 1/2/4/4X/6/12/13 and IP66, IP67, IP68. The IP68 rating means it withstands continuous immersion beyond 1 meter — suitable for washdown and outdoor positions.

What approvals and standards does the XCMD2110C12 meet?

UL and CSA approved. The switch also references EN/IEC 60204-1 (machinery electrical safety) and EN/IEC 60947-5-1 (control circuit devices).

MPN
XCMD2110C12