The Square D Osiswitch XCMD25F0L1 is a heavy-duty miniature limit switch built for severe-duty environments — think washdown zones, outdoor conveyors, and corrosive atmospheres. Its ZAMAK zinc-alloy body and NEMA 1/2/4/4X/6/12/13 plus IP66, IP67, IP68 enclosure ratings mean it survives high-pressure spray, temporary submersion, and dust ingress without a breather. The M12 threaded plunger actuator gives a short 1.8 mm pretravel and 5 mm total travel, so it registers position changes quickly — useful for cam-driven sequences or interlock gates where overtravel is limited. Contact rating is 240 VAC at 1.5 A and 250 VDC at 0.1 A with a 1NO-1NC slow make/break configuration. That DC rating is the one to watch — at 250 VDC, 0.1 A is typical for signal-level switching (PLC inputs, relay coils), not motor loads. The slow-make/break contacts avoid the wear that snap-action sees on low-energy circuits, so it's a fit for dry-contact feedback or safety interlock chains where contact weld must be avoided.
Square D XCMD25F0L1 Limit Switch, 240VAC 1.5A, IP66/67/68
Square D Osiswitch XCMD25F0L1, severe duty miniature limit switch, 240 VAC 1.5 A / 250 VDC 0.1 A, 1NO-1NC slow make/break, M12 threaded plunger, 1 m pre-wired cable, IP66/IP67/IP68, UL/CSA.
Specifications
| Parameter | Value |
|---|---|
| Type | HEAVY DUTY, MINIATURE, MODULAR |
| Operation type | SPRING RETURN |
| Connection type | 1 M PRE WIRED REMOVABLE CABLE CONNECTOR |
| Actuator (Head type) | M12 THREADED PLUNGER HEAD |
| Contact configuration | 1NO-1NC SLOW MAKE/BREAK |
| Enclosure | NEMA 1/2/4/4X/6/12/13, IP66, IP67, IP68 |
| Operating temperature | -13 TO 158 DEG F |
| Body material | ZAMAK[R] ZINC ALLOY |
| Approval | UL, CSA |
| Model | XCMD |
| Category | Severe Duty Limit Switches |
| Pretravel | 1.8 MM |
All specifications
| Parameter | Value |
|---|---|
| Sub-Category | General/Heavy Duty Limit Switch |
| Total travel | 5 MM |
| Contact rating | 240 VAC 1.5 AMPERE, 250 VDC 0.1 AMPERE |
| Operating force | 9.55 LB |
| Manufacturer brand | Square D Co. |
| Product description | Telemecanique XCMD25F0L1 Limit Switch 240Vac 1.5A Metal Xcmd |
| Additional information | APPLICABLE STANDARD EN/IEC 60204-1, EN/IEC 60947-5-1 |
| Full technical description | Heavy Duty, Miniature, Modular Type; 1NO-1NC Slow Make/Break Contact Configuration; 1 M Pre Wired Removable Cable Connector Connection Type; Spring Return Operation Type; 240 VAC 1.5 Ampere, 250 VDC 0.1 Ampere Contact Rating; UL, CSA Approval; NEMA 1/2/4/4X/6/12/13, IP66, IP67, IP68 Enclosure; ZAMAK[R] Zinc Alloy Body Material; -13 to 158 Deg F Operating Temperature; 9.55 lb Operating Force; M12 Threaded Plunger Head Actuator/Head Type; 1.8 mm Pretravel; 5 mm Total Travel; OSISWITCH[R] Brand; Applicable Standard En/Iec 60204-1, En/Iec 60947-5-1; XCMD Model |
Product details
Frequently asked questions
What is the closest alternative to XCMD25F0L1 in the same family?
Within the XCMD series, the closest peer is a variant with a different actuator head (e.g., roller lever or whisker) but the same body, contact block, and enclosure rating. The M12 threaded plunger version is the one you have; if the application needs a different actuation style, the same XCMD base with a different head type is the direct swap.
What are the key ratings I need to check for fit?
The contact rating is 240 VAC 1.5 A and 250 VDC 0.1 A. The enclosure is NEMA 1/2/4/4X/6/12/13 plus IP66/IP67/IP68. Actuator is an M12 threaded plunger with 1.8 mm pretravel and 5 mm total travel. Operating force is 9.55 lb.
What approvals does this switch carry?
UL and CSA approved, and designed to EN/IEC 60204-1 and EN/IEC 60947-5-1.