The Telemecanique XS108BLPAL2 is an M8 threaded, shielded inductive proximity sensor from the XS1 series, with a 2 mm sensing distance and PNP normally-open output. Rated IP67 and NEMA 4X, the brass body with nickel-plated finish handles washdown environments in food, beverage, or packaging lines. The 2-meter prewired cable with bare ends keeps field wiring straightforward — no connector to source or seal.
The 2 mm shielded sensing range means this sensor detects ferrous targets at close proximity only — it's for position confirmation on small cylinders, valve stems, or cam profiles where the target passes within a couple millimeters. Shielded construction allows flush mounting in metal without derating the sensing distance, which simplifies installation in tight manifolds or machined pockets. PNP (sourcing) output at 200 mA maximum load current, normally open, runs directly into most PLC digital inputs without a pull-up resistor. The 12-24 VDC supply range covers standard 24 V control power; the 3-wire configuration is the common industrial interface. IP67 and NEMA 4X mean the sensor body and cable entry withstand hose-directed water and corrosion — suitable for washdown zones in food processing or wastewater treatment. The brass housing with nickel plating adds corrosion resistance beyond standard stainless in some chemical exposures.