Active production, washdown-rated sensing
The XS618B1PBL2: This M18 inductive sensor carries IP68 and IP69K protection ratings, meaning the housing and cable entry withstand both prolonged submersion and high-pressure, high-temperature washdown cycles typical in food-and-beverage or chemical processing lines. The flush-mount construction allows the sensing face to be embedded flush in a metal mounting surface without reducing the 8 mm nominal sensing range on mild steel.
Electrical interface and switching performance
PNP (sourcing) output at 10 mA current consumption, operating over a 10–58 VDC supply range — directly compatible with 24 VDC PLC input modules without a level-shifter. Switching frequency is 1 kHz, which means the sensor can reliably detect targets passing at up to 1,000 events per second — adequate for most conveyor and counting applications, though not for high-speed spindle monitoring.
Mechanical fit and environmental limits
M18 threaded barrel, 62 mm body length, metal housing — fits standard M18 mounting brackets and drill-through holes. The 2 m PVC cable termination means no separate connector is needed; the cable is the wet-end barrier. Rated for -25 to 70 °C ambient, covering most indoor factory environments and outdoor enclosures in temperate climates.
Sourcing and compliance documentation
As an active-production part, the XS618B1PBL2 is quoted to order against BOM quantities through authorized distribution. The manufacturer provides RoHS and REACH compliance declarations, and the sensor carries CE marking for the European market.