The Telemecanique XS7C1A1DBL01M12 is a Size C block-style inductive proximity sensor from the XS7 series, offering a 15 mm front sensing range in a 40 mm W x 15 mm D x 54 mm H PBT housing. It operates on 12 to 24 VDC and uses a 2-wire NC output configuration, switching at up to 1000 Hz. The connection is a 0.1 m pigtail cable terminated with a 4-pin micro M12 connector. Rated IP67 and NEMA 1/4X/12, the sensor withstands washdown and outdoor exposure — suitable for food-and-bev lines or wet machining environments. The NC output means the sensor's internal switch opens when a target is detected, a common fail-safe configuration for presence verification on conveyors or gate monitoring.
Integration Notes
The 2-wire NC output draws a maximum load current of 1.5 to 100 mA. Operating temperature spans -13 to 158 °F. The front sensing position and 15 mm range mean the sensor must be aimed directly at the target — no side-lobe detection. The M12 connector simplifies cable replacement; the 0.1 m pigtail length means the connector sits close to the sensor body, so plan for a mating cable run from that point.