The XS7E1A1PAL01M12 is a Telemecanique XS7-series block-style inductive proximity sensor, listed under the Square D brand, carrying UPC 78590129333 and built around a PBT housing sized 26 mm W x 13 mm D x 40 mm H. It detects ferrous and standard metal targets at the front face with a rated 10 mm sensing distance, switching up to 1000 Hz into a PNP normally-open output.
Power, load, and connection
Power is 12 to 24 VDC across three wires, with a maximum load current of 100 mA and an LED status indicator built into the body. The lead is a 0.1 m pigtail terminated in a 4-pin micro M12 connector, so the sensor drops straight onto a standard M12 cordset without on-panel soldering.
Environmental envelope
The housing meets NEMA 1/4X/12 and IP67, and the operating temperature runs -13 to 158 DEG F, which covers most indoor cabinet and sheltered outdoor mounting points.
Approvals and declarations
The part is listed to UL, CSA, and CE approval schemes, which is the baseline declaration pack most MRO document-control systems expect on a panel-mounted proximity switch. California Proposition 65 warning applies, flagging diisononyl phthalate (DINP) and di-isodecyl phthalate (DIDP) exposure; route the warning through the receiving QA paperwork on receipt.
Sourcing posture
Lifecycle stage is current on the seed record. Submit an RFQ for the BOM line plus the matching M12 cordset and we will source against the live channel.