What the IP69K rating means on this rectangular body
The XS8C4A4PCN12 carries IP65, IP67, and IP69K ingress protection — the IP69K rating means it withstands high-pressure, high-temperature washdown (80–100 bar at 80 °C) common in food, beverage, and pharmaceutical lines where caustic cleaning cycles are routine. The PBT housing and sealed bare-wire exit handle that environment without a secondary enclosure. The rectangular body (40 x 40 x 117 mm) is a compact block that mounts directly to machine frames or brackets — no barrel-nut clearance needed. The unshielded sensing face gives the full 40 mm detection range on mild steel, but the correction factor for stainless or aluminum drops that distance; budget 28 mm for stainless targets.
Supply voltage and output — what connects where
This sensor runs on 12–48 V DC only — no AC supply option. The 4-wire PNP output is configurable as NO or NC (selectable by wiring), sourcing up to 200 mA continuous. That load current covers direct PLC inputs or small relay coils; for higher loads, interpose an interface relay. Termination is bare wire with screw-clamp terminals inside the sensor housing — no connector to replace if the cable gets damaged. The indicator light on the body gives local status during commissioning and fault-finding without a handheld tool.
Compliance and certifications for global installs
The XS8C4A4PCN12 holds UL Listed, CSA, CE, CCC, and (marine) approvals, plus RoHS compliance. That covers North American panel builds, European machinery directive installs, Chinese market equipment, and shipboard applications — one part number for multi-jurisdiction BOMs.