Square D Telemecanique XUB9BPAWM12, Polarized Retroreflective Photoelectric Sensor, 18mm, PNP NO, 2m, 12-24 VDC, IP67.
| Parameter | Value |
|---|---|
| Model | XUB |
| Parameter | Value |
|---|---|
| Type | POLARIZED RETROREFLECTIVE |
| Sensing distance | 2 M |
| Response time | 1 MILLISECOND (ON/OFF) |
| Parameter | Value |
|---|---|
| Operating voltage range | 12 TO 24 VDC |
| Parameter | Value |
|---|---|
| Output configuration | NO, PNP |
| Load current | 100 MILLIAMPERE |
| Parameter | Value |
|---|---|
| Connection type | 4 PIN MICRO CONNECTOR |
| Parameter | Value |
|---|---|
| Enclosure | NEMA 4X/12, IP67 |
| Operating temperature range | -13 TO 131 DEG F |
| Parameter | Value |
|---|---|
| Material | NICKEL PLATED BRASS |
The Square D Telemecanique XUB9BPAWM12 is an 18 mm polarized retroreflective photoelectric sensor with a 2 m sensing range, operating at 12 to 24 VDC with a PNP normally-open output and a 1 ms response time. Housed in a nickel-plated brass threaded barrel with IP67 and NEMA 4X/12 enclosure, it handles washdown environments and carries UL, CSA, and CE approvals.
Carries UL, CSA, and CE approvals.
XUB9BPBWM12 is mechanically identical (18mm brass barrel, 2m range, 4-pin connector) but outputs PNP normally-closed instead of the normally-open signal on this unit. A drop-in swap requires rewiring the output or reconfiguring the PLC input logic.
The listed UPC is 78590184064.
Mechanically it fits the same 18mm hole pattern and connector. However, the output is reversed (NO vs NC), so the PLC digital input wiring or logic configuration must be adjusted.
No related articles