Telemecanique Series XU XUYFANEP60030 Photoelectric Fork Sensor, Through-Beam, Infrared, 30mm Gap, NPN-NC/NO, M8 Connector, IP65.
| Parameter | Value |
|---|---|
| Series | XU |
| Parameter | Value |
|---|---|
| Sensing method | Through-Beam |
| Sensing distance | 1.181" (30mm) |
| Light source | Infrared |
| Parameter | Value |
|---|---|
| Output configuration | NPN-NC/NO |
| Parameter | Value |
|---|---|
| Operating temperature range | -20°C ~ 60°C |
| Parameter | Value |
|---|---|
| Supply voltage | 12V ~ 24V |
| Connection method | Connector, M8 |
| IP rating | IP65 |
The Telemecanique XUYFANEP60030 is a through-beam photoelectric fork sensor from the XU series, using an infrared light source to detect objects passing through a 30mm gap. Output configuration offers both NPN normally-open and normally-closed signals on a single M8 connector, so you can wire fail-safe or active-low logic without an extra part. Rated IP65 and -20°C to 60°C operating range — it handles dust, wash-down splashes, and unheated machine areas.
Most buyer blockers (PLC integration, Arduino hobby use, field replacement) hinge on correct pin assignment and NPN NC/NO logic.
Datasheet specs drive suitability for high-speed conveyor and motion-control applications.
Obsolete/LTB and MRO teams need a qualified FFF alternate before allocation forces unplanned downtime.
Sourcing buyers and brokers must validate authorized-channel availability, MOQ, and gray-market risk.
Engineering teams need a head-to-head spec and pinout delta before approving a substitute on existing machines.
Safety-function design requires SIL/PL claim, PFHd, MTTd, and proof-test interval; absence blocks approval for safety-related use.
No related articles