Skip to main content
Siemens 3RT2023-2AG20-ZX95 — Contactors

Siemens 3RT2023-2AG20-ZX95 SIRIUS Power Contactor, Size S0,

MPN3RT2023-2AG20-ZX95
Active

Siemens SIRIUS power contactor, 3RT2023-2AG20-ZX95, Size S0, 45 mm width, spring-type coil terminals, auxiliary switch included.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

3RT2023-2AG20-ZX95 — Identification
ParameterValue
Contactor frame sizeS0
3RT2023-2AG20-ZX95 — Ratings & Performance
ParameterValue
Rated operational current, AC-12, max.10 A
Rated operational current, AC-4 @ 400 V8.5 A
Rated value @ 400 V3 A
Rated value @ 500 V2 A
Rated value @ 690 V1 A
Rated value @ 230 V1 hp
Rated value @ 24 V10 A
Rated value @ 60 V2 A
Rated value @ 110 V1 A
Rated value @ 220 V0.3 A
3RT2023-2AG20-ZX95 — Control & Coil
ParameterValue
Control supply voltage typeAC
Rated value @ 50 Hz0.25
Rated value @ 50 Hz110 V
3RT2023-2AG20-ZX95 — Contacts & Poles
ParameterValue
Main poles3
Main NO contacts3
Auxiliary contact reliability1 faulty switching per 100 million (17 V, 1 mA)
3RT2023-2AG20-ZX95 — Protection & Coordination
ParameterValue
Short-circuit coordination type 1, fusegG: 63A (690V,100kA), aM: 32A (690V,100kA), BS88: 63A (415V,80kA)
Short-circuit coordination type 2, fusegG: 25A (690V,100kA), aM: 20A (690V,100kA), BS88: 25A (415V,80kA)
Aux. switch short-circuit protection, fusegG: 10 A (500 V, 1 kA)
3RT2023-2AG20-ZX95 — Connection & Mounting
ParameterValue
Main circuit connectionspring-loaded terminals
Aux. / control circuit connectionspring-loaded terminals
Conductor cross-section, solid1 ... 10 mm²
Conductor cross-section, solid or stranded2x (0.5 ... 2.5 mm²)
Conductor cross-section, finely stranded w/ ferrule2x (0.5 ... 1.5 mm²)
Mounting methodscrew and snap-on mounting onto 35 mm standard mounting rail according to DIN EN 60715
Side-by-side mountingYes
3RT2023-2AG20-ZX95 — Durability
ParameterValue
Durability (operating cycles, typ.)10 000 000
Durability with aux. switch block (cycles, typ.)10 000 000
3RT2023-2AG20-ZX95 — Environmental
ParameterValue
Operating temperature range-25 ... +60 °C
Storage temperature range-55 ... +80 °C
Installation altitude, max.2 000 m
3RT2023-2AG20-ZX95 — Mechanical
ParameterValue
Width45 mm
Height102 mm
Depth97 mm
3RT2023-2AG20-ZX95 — Specifications
ParameterValue
At AC4 ... 16 ms

Product details

The Siemens 3RT2023-2AG20-ZX95 is a SIRIUS power contactor in the Size S0 frame, 45 mm wide, 102 mm tall, 97 mm deep. The coil terminals are spring-type, which speeds wiring in panel builds and holds reliably under vibration. An auxiliary switch is included on the contactor, saving a separate aux block for basic feedback or interlocking.

Rated for AC-3 switching at up to 1 000 operating cycles per hour, this contactor handles frequent motor starts without overheating the contacts. For AC-4 duty (plugging, inching) the maximum rate drops to 300 cycles per hour, reflecting the heavier arc stress during reversing or jogging. The 1 hp rating at 230 V confirms it can drive a fractional-horsepower motor directly for small conveyor or pump auxiliaries. Wire range accepts 1... 10 mm² solid or stranded on the main circuit, and 2x (0.5... 2.5 mm²) for the auxiliary circuit, which covers most panel wiring sizes up to 6 AWG.

Mounting and environmental notes

That helps when retrofitting into existing enclosures with odd panel orientations.

Frequently asked questions

What are the key dimensions of this contactor?

Width is 45 mm, height 102 mm, depth 97 mm — the standard Size S0 footprint.

What wire sizes does the main circuit accept?

Solid or stranded wire from 1 to 10 mm², which covers most panel wiring up to approximately 6 AWG.

Does this contactor include an auxiliary switch?

Yes, an auxiliary switch is built in, eliminating the need for a separate add-on block for basic feedback or interlocking.

MPN
3RT2023-2AG20-ZX95