It mounts on a 35 mm DIN rail per DIN EN 60715 using either screw fixing or snap-on, and the mounting position allows +/-180° rotation on a vertical surface plus +/-22.5° tilt forward/backward — useful when you are squeezing it into a tight enclosure layout. The power terminals accept stranded wire from 6 to 70 mm², so it handles the main motor feed without needing a separate terminal block. The auxiliary contact block is included (screw-type terminals) and accepts 2x (0.5...1.5 mm²) solid or 2x (0.75...2.5 mm²) stranded — standard control wiring sizes. The auxiliary contacts are rated for AC switching across the common control voltages: 10 A at 24 V, 6 A at 230 V, 3 A at 400 V, 2 A at 500 V, 1 A at 690 V. That covers most panel signal circuits without derating concerns up to the stated voltages.
The contactor measures 140 mm high, 70 mm wide, and 152 mm deep. No special maintenance interval needed beyond standard contact inspection.