Siemens SIRIUS, motor protection circuit breaker, size S00, Trip Class 10, 100 kA breaking capacity at 400 V, phase failure detection, screw-type terminals, 3RV2011-0HA10-ZX95.
| Parameter | Value |
|---|---|
| Series | SIRIUS |
| Product designation | Circuit breaker |
| Frame size | S00 |
| Parameter | Value |
|---|---|
| Rated operational current (Ie) | 0.8 A |
| Rated voltage | 20 ... 690 V |
| Rated voltage, AC-3 (max.) | 690 V |
| Rated frequency | 50 ... 60 Hz |
| Rated insulation voltage (Ui), pollution degree 3 | 690 V |
| Rated impulse withstand voltage (Uimp) | 6 kV |
| Number of poles | 3 |
| Power loss (AC, hot) | 7.25 W |
| Power loss, per pole (AC, hot) | 2.4 W |
| Parameter | Value |
|---|---|
| Overload release setting range | 0.55 ... 0.8 A |
| Instantaneous short-circuit trip current | 10 A |
| Trip class | CLASS 10 |
| Breaking capacity at 240 V (AC) | 100 kA |
| Breaking capacity at 400 V (AC) | 100 kA |
| Breaking capacity at 500 V (AC) | 100 kA |
| Breaking capacity at 690 V (AC) | 100 kA |
| Breaking capacity at 240 V | 100 kA |
| Breaking capacity at 690 V | 100 kA |
| Short-circuit trip type | magnetic |
| Overload release type | thermal |
| Short-circuit protection | Yes |
| Phase-failure detection | Yes |
| Ground-fault detection | No |
| Auxiliary switch extendable | Yes |
| Parameter | Value |
|---|---|
| Endurance, main contacts (typ.) | 100 000 |
| Endurance, auxiliary contacts (typ.) | 100 000 |
| Switching frequency, AC-3 (max.) | 15 1/h |
| Auxiliary CO (changeover) contacts | 0 |
| Parameter | Value |
|---|---|
| Main-circuit terminal type | screw-type terminals |
| Main-circuit connector arrangement | Top and bottom |
| Conductor cross-section, solid / stranded | 2x (0,75 ... 2,5 mm²), 2x 4 mm² |
| Conductor cross-section, finely stranded with ferrule | 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²) |
| Conductor range, AWG (main contacts) | 2x (18 ... 14), 2x 12 |
| Parameter | Value |
|---|---|
| Height | 97 mm |
| Width | 45 mm |
| Depth | 97 mm |
| Mounting method | screw and snap-on mounting onto 35 mm DIN rail according to DIN EN 60715 |
| Mounting position | any |
| Parameter | Value |
|---|---|
| Operating temperature | -20 ... +60 °C |
| Storage temperature | -50 ... +80 °C |
| Transport temperature | -50 ... +80 °C |
| Relative humidity (operation) | 10 ... 95 % |
| Max. installation altitude | 2 000 m |
| Parameter | Value |
|---|---|
| Design Of The Product | For motor protection |
The 3RV2011-0HA10-ZX95: Mounts via screw fixing or snap-on onto a 35 mm DIN rail per DIN EN 60715. The 45 mm width and 97 mm depth fit standard S00 panel layouts. Any mounting position is allowed, and the operating temperature range of -20 to +60 °C covers most indoor panel environments. Terminal capacity accepts 2x (0.75 to 2.5 mm²) solid or stranded, or 2x 4 mm², with M3 screw terminals for the main current circuit.
It has a 100 kA breaking capacity at 400 V AC, which means it can safely interrupt fault currents up to that level without upstream devices needing to clear the fault.
It is Trip Class 10, meaning it will trip within 10 seconds at 600% of the thermal setting, protecting the motor during start-up.
Yes, it includes phase failure detection, which prevents single-phasing damage to the motor.
This part is sourced and quoted to order against an RFQ through independent distribution channels. Submit an RFQ to confirm current pricing and availability.
No related articles