Skip to main content
Log in
Siemens 3RV2011-1DA15 — Motor Protection Circuit Breakers (MPCB)

Siemens 3RV2011-1DA15 SIRIUS Motor Protection Circuit Breake

MPN3RV2011-1DA15
Active

Siemens SIRIUS 3RV2011-1DA15 motor protection circuit breaker, Trip Class 10, 100 kA breaking capacity at 400 V, phase failure detection, screw and snap-on 35 mm DIN rail mount.

$124.08Ref. price · indicative, final on quote
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

3RV2011-1DA15 — Identification
ParameterValue
SeriesSIRIUS
Product designationCircuit breaker
Frame sizeS00
3RV2011-1DA15 — Electrical
ParameterValue
Rated operational current (Ie)3.2 A
Rated voltage20 ... 690 V
Rated voltage, AC-3 (max.)690 V
Rated frequency50 ... 60 Hz
Rated insulation voltage (Ui), pollution degree 3690 V
Rated impulse withstand voltage (Uimp)6 kV
Number of poles3
Power loss (AC, hot)7.25 W
Power loss, per pole (AC, hot)2.4 W
3RV2011-1DA15 — Protection & Tripping
ParameterValue
Overload release setting range2.2 ... 3.2 A
Instantaneous short-circuit trip current42 A
Trip classCLASS 10
Breaking capacity at 240 V (AC)100 kA
Breaking capacity at 400 V (AC)100 kA
Breaking capacity at 500 V (AC)100 kA
Breaking capacity at 690 V (AC)10 kA
Breaking capacity at 240 V100 kA
Breaking capacity at 690 V10 kA
Short-circuit trip typemagnetic
Overload release typethermal
Short-circuit protectionYes
Phase-failure detectionYes
Ground-fault detectionNo
Auxiliary switch extendableYes
3RV2011-1DA15 — Endurance & Switching
ParameterValue
Endurance, main contacts (typ.)100 000
Endurance, auxiliary contacts (typ.)100 000
Switching frequency, AC-3 (max.)15 1/h
Auxiliary CO (changeover) contacts0
3RV2011-1DA15 — Connections
ParameterValue
Main-circuit terminal typescrew-type terminals
Main-circuit connector arrangementTop and bottom
Conductor cross-section, solid / stranded2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²)
Conductor cross-section, finely stranded with ferrule2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²)
Conductor range, AWG (main contacts)2x (18 ... 14), 2x 12
3RV2011-1DA15 — Mechanical
ParameterValue
Height97 mm
Width45 mm
Depth97 mm
Mounting methodscrew and snap-on mounting onto 35 mm DIN rail according to DIN EN 60715
Mounting positionany
3RV2011-1DA15 — Environmental
ParameterValue
Operating temperature-20 ... +60 °C
Storage temperature-50 ... +80 °C
Transport temperature-50 ... +80 °C
Relative humidity (operation)10 ... 95 %
Max. installation altitude2 000 m
3RV2011-1DA15 — Specifications
ParameterValue
Design Of The ProductFor motor protection

Product details

Built for the Pit: Motor Protection That Shrugs Off the Dust

Rated for a supply voltage range of 20 to 690 V, it covers low-voltage motor circuits from small pumps up to mill drives. Breaking capacity hits 100 kA at 400 V and 500 V, and 10 kA at 690 V — so it handles high-fault-current scenarios common in mining and heavy industrial distribution without needing a backup fuse on the line side.

Mounting and Wiring: Fits Any Position, No Special Treatment

Wiring terminals accept 2x (0.5 to 1.5 mm²) or 2x (0.75 to 2.5 mm²) solid or stranded copper. Main contact screws are M3. Clearance distances: 50 mm upwards and downwards, 30 mm at the side — no surprises for the panel builder.

Frequently asked questions

What are the key ratings for the 3RV2011-1DA15?

It is a Trip Class 10 motor protection circuit breaker rated for 20–690 V supply, with breaking capacity of 100 kA at 400 V and 500 V, and 10 kA at 690 V. It includes phase failure detection.

What are the mounting dimensions and clearances?

Width 45 mm, depth 97 mm, height 97 mm. Mounts on 35 mm DIN rail per DIN EN 60715. Requires 50 mm clearance above and below, 30 mm at the side.

MPN
3RV2011-1DA15