Skip to main content
ABB 1SFA896104R7000

ABB 1SFA896104R7000 PSR6 Softstarter, 208-600V AC

MPN 1SFA896104R7000
Active

ABB PSR6 series soft starter, order code 1SFA896104R7000, screw terminals, soft start with voltage ramp, 0... 20 second ramp time, 208... 600 V AC operational, 100... 240 V AC control supply, 4xIe for 6s starting capacity.

$169.00 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

1SFA896104R7000 specifications
ParameterValue
Terminal typeScrew Terminal
Voltage208 ... 600 V AC
Frequency50/60 Hz
ProtocolFiledBusPlug(Optional)
Temp operating max60 °C
Temp operating min-25 °C

Product details

The ABB 1SFA896104R7000 sits in the PSR6 soft-starter line and is built for soft start with voltage ramp on three-phase motor loads up to 208... 600 V AC, with a 4xIe for 6s starting capacity that covers typical heavy-inertia starts. Control supply is 100... 240 V AC, so the same chassis can be fed from a panel control transformer worldwide. The 0... 20 second ramp time gives enough span for pump and conveyor profiles without an external potentiometer. Initial voltage during start is adjustable from 40... 70 %, which sets the first kick the motor sees before the ramp walks up. Screw terminals on the main circuit accept rigid conductors from 0.75... 2.5 mm², control circuit 1 x 0.75... 2.5 mm², tightening torque 1 N·m on the control circuit — values that match the rest of the PSR6 family and reuse the same panel-builder layout. IP20 on the main terminals keeps fingers off, which is what you want with the cover off during commissioning. Run signal relay is present; fault, by-pass and overload signal relays are not on this variant.

Sourcing posture and where it drops in the panel

Production status is not asserted from the record for this item. The PSR6 chassis covers 208... 600 V AC and 100... 240 V AC control supply; overload pairing names MS116 4.00... 10.00. Ambient air temperature operation is -25... +60 °C with IP20 on the main terminals. The closer PSR6 sibling is 1SFA896104R1100; R1100 is a different control/supply configuration within the PSR6 frame, so verify the suffix against the panel drawing before swapping. The other two listed peers (1SFA896106R7000 and 1SFA896105R1100) are not the same PSR6 frame.

Compliance trail for the documentation pack

RoHS conformity follows EU Directive 2011/65/EU and Amendment 2015/863 July 22, 2019, WEEE Category 5 (small equipment, no external dimension more than 50 cm), B2B classification. UL/CSA horsepower at 200... 208 V AC three-phase is 1 Hp, UL/CSA control-circuit tightening torque 8.9 in·lb, rated frequency 50/60 Hz.

MPN
1SFA896104R7000