Skip to main content
ABB A26-30-10-80

ABB A26-30-10-80 3-Pole Contactor, 28 A, 240 V AC Coil

MPN A26-30-10-80
End of Life

ABB A26-30-10-80, A26 series 3-pole contactor, 28 A rated, 240 V AC coil, 1 NO auxiliary contact.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A26-30-10-80 specifications
ParameterValue
Product typeContactor
Current28 A
Poles3

Product details

Rated 28 A continuous, this is a 3-pole contactor sized for moderate motor loads — think small conveyors, fans, or pump starters up to roughly 7.5 kW at 400 V three-phase (standard IEC utilization category AC-3). The 240 V AC coil means the control circuit must supply that voltage; verify your control transformer or PLC output relay matches before wiring. A single normally-open auxiliary contact is built in — enough for a seal-in or status feedback to a PLC input, but not for multi-signal interlocking. If your circuit needs more auxiliary poles, plan for a side-mount block.

The A26 frame mounts on DIN rail or panel via screw base. Strip length of 8 mm avoids whiskers under the spring-cage or screw clamp. Keep the coil suppression diode (if used) close to the contactor — long flyback paths radiate noise into adjacent control wiring.

MPN
A26-30-10-80