Skip to main content
Schneider Electric A9C20433

Schneider Electric A9C20433 Acti9 iCT Contactor, 3P, 25 A AC

MPN A9C20433
Obsolete

Schneider Electric Acti9 iCT, contactor, 3P, 25 A AC-7A, 400 V AC, 127 V AC 60 Hz coil, clip-on 35 mm DIN rail, IP20.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9C20433 key specifications
ParameterValue
Control typeRemote control
Control signal typeMaintained
Main product or component typeContactor
Voltage400 V AC 60 Hz
Coil voltage127 V AC 60 Hz
Insulation voltage ui500 V AC 50/60 Hz
Current25 A AC-7 A 8.5 A AC-7B
Frequency100 switching operations/day
Poles3P
Temp storage max70 °C
Temp storage min-40 °C
Temp operating max60 °C

All specifications

A9C20433 additional specifications
ParameterValue
Temp operating min-5 °C
Storage temperature-40...70 °C
Pollution degree2
ColorWhite
Depth68 mm
Width36 mm
Height81 mm
Mechanical life cycles1000000 cycles
ApplicationMotor-heating-lighting
Operating temperature-5...60 °C

Product details

The Schneider Electric A9C20433 is an Acti9 iCT contactor — a 3-pole, normally-open contactor rated for 25 A in AC-7A duty (motor-heating-lighting loads) and 8.5 A in AC-7B (resistive lighting), with a control coil that pulls 127 V AC at 60 Hz. The 3 NO pole composition means it switches three separate lines simultaneously, which is what you need for a 3-phase motor or a three-wire heating circuit. Rated operational voltage is 400 V AC at 60 Hz, with an insulation voltage of 500 V AC 50/60 Hz. That puts it solidly in the 400 V class for light commercial gear — think small pumps, exhaust fans, or banked lighting contactors in a retail strip. The contactor is rated for 100,000 electrical cycles under AC-7A at 25 A, and 30,000 cycles under the heavier AC-7B and AC-3 motor-duty curves. Mechanical durability is rated at 1,000,000 cycles, so the coil and armature outlast the contacts in most duty cycles.

Depth is 68 mm, which clears most shallow enclosures. Terminals are tunnel type: power circuit accepts 1 to 4 mm² flexible or 1.5 to 6 mm² rigid; control circuit accepts 1.5 to 2.5 mm² rigid or flexible. Tightening torque is 0.8 N.m for both control and power circuits — use a torque screwdriver; overtightening strips the tunnel. IP20 on the body, IP40 inside a modular enclosure per IEC 60529.

Designed and tested to IEC/EN 61095 (household and similar electromechanical contactors) and EN/IEC 60947-4-1 (low-voltage switchgear — contactors and motor-starters).

MPN
A9C20433