Skip to main content
Schneider Electric A9C52310

Schneider Electric A9C52310 Reflex iC60N 10A 3P C MCB

MPN A9C52310
Obsolete

Schneider Electric Acti9 Reflex iC60N, integrated control circuit breaker, 10 A, 3P, curve C, 20 kA Icu at 240 V AC.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9C52310 specifications
ParameterValue
Trip unit typeThermal-magnetic
Control signal typeMaintained Impulse
Main product or component typeIntegrated control circuit breaker
Coil voltage230 V AC 50/60 Hz 24 V AC 50/60 Hz 48 V AC 50/60 Hz 24 V DC 48 V DC
Insulation voltage ui500 V AC
Breaking capacity20 kA Icu at 220...240 V AC 50/60 Hz conforming to EN/IEC 60947-2 10 kA Icu at 380...415 V AC 50/60 Hz conforming to EN/IEC 60947-2
IP ratingIP20
Pollution degree3
ColorWhite
Depth77 mm
Width99 mm
Height84 mm
Electrical life cyclesAC-1: 50000 cycles AC 50 Hz
Mechanical life cycles50000 cycles
ApplicationControl Distribution

Product details

The Schneider Electric A9C52310 is a Reflex iC60N integrated control circuit breaker — a thermal-magnetic MCB with a built-in control function, meaning it combines overcurrent protection with remote ON/OFF switching capability in a single DIN-rail module. It is part of the Acti9 range and carries a 10 A rated current across three protected poles with a C trip curve, so it is sized for general-purpose distribution and control circuits where moderate inrush (motors, transformers, lighting) is expected. The white body and toggle/push-button control interface include local signalling via a multi-colour LED that indicates device state, overheat, and trip conditions.

Rated breaking capacity is 20 kA Icu at 220–240 V AC and 10 kA Icu at 380–415 V AC, both per EN/IEC 60947-2. The N breaking capacity code indicates distribution-level fault interruption. The control circuit accepts multiple voltage options: 230 V AC, 24 V AC, 48 V AC, 24 V DC, or 48 V DC, selectable by the supply wired to the control terminals. This flexibility lets the same part be used across different panel control voltages without stocking multiple variants.

MPN
A9C52310