Skip to main content
Schneider Electric A9K23620

Schneider Electric A9K23620 Acti9 iK60N MCB, 20A 1P+N Curve

MPN A9K23620
Obsolete

Schneider Electric Acti9 iK60N miniature circuit breaker, A9K23620, 20 A rated, 1P+N, curve B, 6 kA breaking capacity at 230 V AC, thermal-magnetic trip, clip-on DIN rail mount.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9K23620 key specifications
ParameterValue
Control typeToggle
Trip unit typeThermal-magnetic
Main product or component typeMiniature circuit-breaker
Insulation voltage ui440 V AC 50/60 Hz conforming to EN/IEC 60898-1
Breaking capacity6000 A Icn at 230 V AC 50/60 Hz conforming to EN/IEC 60898-1
IP ratingIP20
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min-25 °C
Storage temperature-40...85 °C
Pollution degree2 conforming to EN/IEC 60898-1

All specifications

A9K23620 additional specifications
ParameterValue
ColorWhite
Depth78.5 mm
Width36 mm
Height85 mm
Electrical life cycles10000 cycles
Mechanical life cycles20000 cycles
ApplicationDistribution
Operating temperature-25...60 °C

Product details

The Schneider Electric A9K23620 is an Acti9 iK60N miniature circuit breaker — a 20 A, 1P+N unit with a B tripping curve. The 6 kA breaking capacity at 230 V AC (EN/IEC 60898-1) covers most branch-circuit fault levels in those settings; the B curve (magnetic trip at 3–5 × In) suits resistive or general-purpose loads where inrush is low.

Above that, the thermal-magnetic element responds: the thermal bimetal handles overloads (slow, inverse-time), and the magnetic coil clears short-circuits at 3–5 × In (60–100 A). That B curve is standard for lighting and socket-outlet circuits where starting surges are modest — not for motor or transformer loads that would nuisance-trip on a B curve. The 1P+N configuration switches the phase and breaks the neutral (neutral is switched but not protected against overload). The neutral position is left, which matters when replacing a unit in a multi-pole assembly — the busbar alignment must match.

The A9K23620 is listed as current-production (active lifecycle). It is a standard catalog item in the Acti9 range, widely specified across European and Middle Eastern distribution boards. No last-time-buy or end-of-life notice is in effect for this order code.

MPN
A9K23620