Skip to main content
Schneider Electric A9L16445

Schneider Electric A9L16445 Acti9 iPRD40r Surge Arrester, 3P

MPN A9L16445
Obsolete

Schneider Electric Acti9 iPRD40r, Type 2 surge arrester, 3 poles, 340 V AC, 40 kA max discharge, with remote signalling, clip-on DIN rail mount.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9L16445 specifications
ParameterValue
Voltage400 V AC (+/- 10 %) at 50/60 Hz
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min-25 °C
Storage temperature-40...85 °C
ColorWhite (RAL 9003)
Depth69 mm
Width54 mm
Height81 mm
ApplicationDistribution
Operating temperature-25...60 °C

Product details

The A9L16445: It clips onto a DIN rail, occupying 6 modules of 9 mm pitch (54 mm total width), with a depth of 69 mm and height of 81 mm. That's a standard panel footprint — no surprises for a retrofit into an existing Acti9 distribution board. The headline numbers: 40 kA maximum discharge current (common mode, L/PE), 15 kA nominal discharge current per mode, and a total discharge capacity of 120 kA across all paths. The voltage protection level (Up) is clamped below 1.4 kV at Type 2 duty — that's the let-through voltage your downstream equipment sees during a surge event.

Terminals are tunnel type, accepting 2.5 to 35 mm² on both the line and load side. Tightening torque is 2.5 N·m — standard for this conductor range. The unit ships with a white (RAL 9003) housing, which is the usual finish for Acti9 modular devices. It requires an associated external circuit breaker: Schneider specifies the iC60N, iC60H, or iC60L, all 40 A curve C, with interrupting capacities of 10 kA, 15 kA, or 25 kA respectively. That breaker is your overcurrent backup; the arrester itself handles the surge path. Remote signalling is built in — a single changeover contact (1 C/O) rated 0.25 A / 250 V AC, 50/60 Hz.

Operating temperature range is -25 to 60 °C, storage from -40 to 85 °C, with relative humidity 5 to 90 %. Maximum operating altitude is 2000 m. IK03 impact resistance per IEC 62262.

MPN
A9L16445