Skip to main content
Schneider Electric A9S68480

Schneider A9S68480 Acti9 iINT Switch Disconnector, 4P, 80 A

MPN A9S68480
Active

Schneider Electric Acti9 iINT switch disconnector, A9S68480, 4 poles, 80 A rated operational current at 400 V AC, AC-22A utilization category, for isolation and control on DIN rail.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9S68480 key specifications
ParameterValue
Control typeToggle
Main product or component typeSwitch disconnector
Voltage415 V AC 50/60 Hz
Insulation voltage ui500 V AC 50/60 Hz
Current80 A at 400 V AC 50/60 Hz
Utilization categoryAC-22 A
IP ratingIP20
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min-25 °C
Storage temperature-40...85 °C

All specifications

A9S68480 additional specifications
ParameterValue
Pollution degree3
ColorWhite
Depth73 mm
Width72 mm
Height85 mm
Electrical life cycles10000 cycles
Mechanical life cycles20000 cycles
ApplicationIsolation Control
Operating temperature-25...60 °C

Product details

The Schneider Electric A9S68480 is a 4-pole switch disconnector from the Acti9 iINT range, rated for 80 A at 400 V AC (50/60 Hz) in AC-22A utilization category — meaning it handles mixed resistive and inductive loads, typical for motor control and distribution sub-circuits where isolation is also required. It is certified for isolation (suitability for isolation: Yes) and carries a contact position indicator, so a technician can verify the open state at a glance. The 6 kV rated impulse withstand voltage (Uimp) and pollution degree 3 rating suit it for fixed industrial panels where transient overvoltages and conductive dust are expected.

Tunnel-type terminals accept 6 to 50 mm² rigid or 6 to 35 mm² flexible (with or without ferrule); strip length is 14 mm, tighten to 3.5 N·m. Compatible with comb busbars and distribution blocks on top or bottom, which simplifies panel wiring when feeding multiple downstream breakers.

Durability and environmental ratings

Rated for 10,000 electrical cycles and 20,000 mechanical cycles — a solid service life for a panel isolator that sees daily switching. The IP20 finger-safe terminals are standard for enclosed panels; the unit is tropicalised (class 2) and operates from -25 °C to 60 °C, with storage from -40 °C to 85 °C at up to 95% relative humidity. The 1500 A rated short-time withstand current (Icw) and 5 kA short-circuit making capacity (Icm) mean it can handle fault conditions long enough for an upstream protective device to clear.

MPN
A9S68480