Skip to main content
Schneider Electric A9S70663

Schneider Electric A9S70663 Acti9 iSW-NA Switch-Disconnector

MPN A9S70663
Obsolete

Schneider Electric Acti9 iSW-NA, switch-disconnector, 1P + N, 63 A at 230/240 V AC, AC-22A, DIN rail mount, IP20.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9S70663 key specifications
ParameterValue
Control typeRemote tripping Toggle
Main product or component typeSwitch disconnector
Voltage230/240 V AC 50/60 Hz
Insulation voltage ui500 V AC 50/60 Hz conforming to EN/IEC 60947-3
Current63 A at 230/240 V AC 50/60 Hz
Utilization categoryAC-22 A conforming to EN/IEC 60947-3
IP ratingIP20
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-35 °C
Storage temperature-40...85 °C

All specifications

A9S70663 additional specifications
ParameterValue
Pollution degree3 conforming to IEC 60947-3
ColorWhite
Depth74 mm
Width36 mm
Height85 mm
Electrical life cycles15000 cycles
Mechanical life cycles20000 cycles
ApplicationControl Isolation
Operating temperature-35...70 °C

Product details

Switch-disconnector for control and isolation

The Schneider Electric A9S70663 is an Acti9 iSW-NA switch-disconnector, 1P + N poles, rated 63 A at 230/240 V AC 50/60 Hz. It is designed for control and isolation applications, confirmed by its AC-22A utilisation category per EN/IEC 60947-3, meaning it handles switching of mixed resistive and inductive loads including moderate motor loads. The part is certified for isolation suitability per the same standard, giving a visible break and positive contact indication.

Rated operational current of 63 A at 230/240 V AC defines the continuous load it can carry in normal service. The AC-22A rating confirms it can switch mixed loads up to that current — not just resistive heating, but also moderate motor and transformer inrush. Rated short-time withstand current (Icw) is 1.26 kA for 1 second, and short-circuit making capacity (Icm) is 5 kA when used alone — this tells you the switch can close onto a fault up to 5 kA without welding contacts, and can withstand a through-fault of 1.26 kA for one second while upstream protection clears it. Impulse withstand voltage (Uimp) of 6 kV gives confidence in surge environments typical of industrial panels.

Tunnel-type terminals accept 1 to 35 mm² rigid or 1 to 25 mm² flexible with or without ferrules; strip length 14 mm, tightening torque 3.5 N·m. Compatible with comb busbars top or bottom for daisy-chaining multiple devices in a distribution board. IP20 finger-safe protection, suitable for enclosed panel use.

MPN
A9S70663