Skip to main content
Schneider Electric A9S70690

Schneider Electric A9S70690 Acti9 iSW-NA Switch Disconnector

MPN A9S70690
Obsolete

Schneider Electric Acti9 iSW-NA switch disconnector, 1P+N, 100 A rated operational current, AC-22A, EN/IEC 60947-3, white, clip-on DIN rail mount.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9S70690 key specifications
ParameterValue
Control typeRemote tripping Toggle
Main product or component typeSwitch disconnector
Voltage230/240 V AC 50/60 Hz
Insulation voltage ui500 V AC 50/60 Hz conforming to EN/IEC 60947-3
Current100 A at 230/240 V AC 50/60 Hz
Utilization categoryAC-22 A conforming to EN/IEC 60947-3
IP ratingIP20
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-35 °C
Storage temperature-40...85 °C

All specifications

A9S70690 additional specifications
ParameterValue
Pollution degree3 conforming to IEC 60947-3
ColorWhite
Depth74 mm
Width36 mm
Height85 mm
Electrical life cycles15000 cycles
Mechanical life cycles20000 cycles
ApplicationIsolation Control
Operating temperature-35...70 °C

Product details

The Schneider Electric A9S70690 is an Acti9 iSW-NA switch disconnector rated for 100 A at 230/240 V AC 50/60 Hz, in a 1P+N pole configuration. It is designed for isolation and control duties, certified to EN/IEC 60947-3, and carries an AC-22A utilisation category — meaning it is suited for switching mixed resistive and inductive loads, including motor circuits within its rating, with a making and breaking capacity that covers normal service conditions. The 100 A rating at 230/240 V AC is the headline figure for BOM fit; verify your load type against the AC-22A curve.

For motor loads, the AC-22A category covers switching of mixed loads including motors up to the rated current — but if your application requires frequent motor starting under full load, check the AC-23 category rating (not listed here) for a higher making capacity. The short-time withstand current (Icw) of 1.5 kA for 1 second and short-circuit making capacity (Icm) of 5 kA (switch-disconnector alone) define its fault-handling capability: it can close onto a fault up to 5 kA and withstand 1.5 kA for 1 second without damage, which is typical for a panelboard feeder switch. The neutral position is left, and the device provides local ON/OFF indication and a contact position indicator — so an operator can visually confirm the state without relying on a panel lamp.

Tunnel-type terminals accept cables up to 35 mm² rigid or 25 mm² flexible (with or without ferrule), with a tightening torque of 3.5 N·m and a wire stripping length of 14 mm. The terminals are accessible from top or bottom, and the switch is compatible with comb busbars on either side — so it can be fed from a busbar system or individually wired.

MPN
A9S70690