Skip to main content
Schneider Electric A9XPH416

Schneider Electric A9XPH416 Acti9 Comb Busbar, 100 A, 415 V

MPN A9XPH416
Obsolete

Schneider Electric Acti9 comb busbar, 3L+N, 18 mm pitch, 16 modules, 100 A at 40 °C, 415 V AC, IP20, obsolete.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9XPH416 specifications
ParameterValue
Connector typeTooth
Main product or component typeComb busbar
Voltage415 V AC
Insulation voltage ui500 V AC conforming to IEC 61439-2
Current100 A at 40 °C
Terminal pitch18 mm
Pollution degree3 conforming to IEC 60947-7-1
ColorWhite (RAL 9003)
Width288 mm

Product details

The Schneider Electric A9XPH416 is an Acti9 comb busbar — a 4-way (3L+N) connection accessory rated 100 A at 40 °C and 415 V AC, with an 18 mm connection pitch spanning 16 modules (288 mm total width). It distributes power from a single feed to multiple downstream devices in a panel, with the N L2 L3 marking and a 4 ways N + 3 L pole configuration per way.

The 100 A rating at 40 °C sets the continuous current limit for the busbar in a panel environment — derate above that ambient. The 415 V AC operational voltage matches standard three-phase distribution in many industrial and commercial installations. The 18 mm pitch and 16-module length mean it occupies 288 mm of DIN-rail width, fitting into a cuttable form factor that can be trimmed to the exact number of ways needed.

Mounts horizontally on DIN rail via the tooth-type connector. The busbar is insulated and accepts top or bottom feed on tunnel-type or double terminals. IP20 protection applies only when end-pieces and tooth covers are fitted — plan for those accessories if the panel requires finger-safe touch protection. The 960 °C glow-wire test (IEC 60695-2-1) confirms fire resistance for 30 seconds, relevant for panel certification to EN/IEC 61439-1.

MPN
A9XPH416