Skip to main content
Schneider Electric ATV212WU55N4CZH28

Schneider ATV212WU55N4CZH28 Altivar 212 VFD, 5.5 kW, C1 EMC

MPN ATV212WU55N4CZH28
Obsolete

Schneider Electric Altivar 212, ATV212WU55N4CZH28, 5.5 kW / 7.5 hp variable speed drive for asynchronous motors, 380-480 V three-phase, integrated Class C1 EMC filter, Modbus serial, IP20, with heat sink.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV212WU55N4CZH28 specifications
ParameterValue
Connector type1 RJ45 1 open style
Main product or component typeVariable speed drive
Voltage= 1 mOhm 500 V DC for 1 minute
Current11 A at 380 V 8.7 A at 480 V
Horsepower7.5 hp
Frequency50...60 Hz - 5...5 %
IP ratingIP54
Temp storage max70 °C
Temp storage min-25 °C
Temp operating max50 °C
Temp operating min-10 °C
Storage temperature-25...70 °C
Pollution degree3 conforming to IEC 61800-5-1
Depth208 mm
Width230 mm
Height340 mm
Data format8 bits, 1 stop, odd even or no configurable parity
Operating positionVertical +/- 10 degree

Product details

The Schneider ATV212WU55N4CZH28 is a 5.5 kW (7.5 hp) variable speed drive from the Altivar 212 family, sized for standard asynchronous motors on 380-480 V three-phase supply. The 11 A line current at 380 V (8.7 A at 480 V) sets the upstream protection and cable sizing — a C1 integrated EMC filter is already onboard, so no external filter is needed for conducted emissions compliance in most industrial environments. The drive carries an adjustable switching frequency of 6 to 16 kHz; above 12 kHz you derate the output current, which matters if you are running a long motor cable or a motor with high capacitive coupling to ground.

Integration and fieldbus fit

Mounts vertically (±10°) with the heat sink clear of enclosures — the 230 mm width and 340 mm height fit a standard 600 mm panel backplate with room for the required top/bottom cable gland clearance. The 208 mm depth includes the heat sink; account for bending radius of the motor and line cables behind the drive. Communication is via the built-in 2-wire RS 485 Modbus RTU port (RJ45 plus open-style connector) at 9600 or 19200 bps, addressing up to 247 nodes. An optional LonWorks communication card plugs in for building-management-system integration.

The ATV212WU55N4CZH28 is classified at a mature lifecycle stage — still available but not a new-design target. For a GMP-validated line where change control is critical, the CE marking and full EN/IEC 61800-3 compliance suite provide the documented emissions and immunity profile needed for an IQ/OQ package.

MPN
ATV212WU55N4CZH28