Skip to main content
Schneider Electric ENW13275

Schneider EasyPact NW ENW13275 Switch Disconnector, 1000 A,

MPN ENW13275
Active

Schneider Electric EasyPact NW series, ENW13275 switch disconnector, 1000 A AC-23A, 3 poles, fixed mounting, 196 mm depth.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW13275 key specifications
ParameterValue
Main product or component typeSwitch disconnector
Voltage440 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 1000 A AC 50/60 Hz 440 V
Utilization categoryAC-23 A
IP ratingIP30
Terminal pitch70 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C
Storage temperature-40...85 °C

All specifications

ENW13275 additional specifications
ParameterValue
Pollution degreeclass 3
Depth196 mm
Width276 mm
Height301 mm
Mechanical life cycles20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3
ApplicationDistribution
Operating temperature-5...70 °C

Product details

The Schneider Electric ENW13275 is a fixed-mounted switch disconnector from the EasyPact NW range, rated 1000 A in AC-23A utilisation category at 440 V AC 50/60 Hz. That AC-23A rating means it handles motor loads with frequent switching — not just resistive heating — so it fits distribution and motor-control panels where isolation and load-break are both required. Three poles, rear-connected, with a 70 mm connection pitch without spreader.

Short-time withstand (Icw) is 50 kA for 1 second at 220–440 V — that tells you the switch can ride through a fault until an upstream breaker clears, without welding or failing. Making capacity (Icm) is 75 kA at the same voltage range, meaning it can close onto a bolted fault. Impulse withstand (Uimp) is 12 kV, which covers surge coordination in industrial environments.

MPN
ENW13275