Skip to main content
Schneider Electric ENW13283

Schneider Electric ENW13283 EasyPact NW Switch Disconnector,

MPN ENW13283
Active

Schneider Electric EasyPact NW switch disconnector, ENW13283, 630 A AC-23A, 3 poles, fixed mounting, 440 V AC, 50/60 Hz.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW13283 key specifications
ParameterValue
Main product or component typeSwitch disconnector
Voltage440 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 630 A AC 50/60 Hz 440 V
Utilization categoryAC-23 A
IP ratingIP30
Terminal pitch70 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C
Storage temperature-40...85 °C without control unit

All specifications

ENW13283 additional specifications
ParameterValue
Pollution degreeclass 3
Depth196 mm
Width346 mm
Height301 mm
Mechanical life cycles20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3
ApplicationDistribution
Operating temperature-5...70 °C

Product details

Switch disconnector for distribution duty

The Schneider Electric ENW13283 is a 3-pole switch disconnector in the EasyPact NW range, rated 630 A in AC-23A utilisation category at 440 V AC 50/60 Hz. That AC-23A rating means it handles switching of mixed motor and resistive loads — the heavy lifting in distribution panels where you need isolation plus load-break capability. It is certified for isolation per IEC 60947-3, with a visible contact position indicator confirming the open gap.

Rated for fault conditions

Rated short-time withstand current (Icw) is 50 kA for 1 second at 220–440 V, and the short-circuit making capacity (Icm) reaches 75 kA at the same voltage range. These figures define the switch's ability to survive and close onto a fault — critical for selectivity studies in distribution boards.

Fixed mounting on a rail base plate, with rear connection and a 70 mm connection pitch without spreader. The IP30 enclosure protection suits indoor panel installation — not washdown, but adequate for standard switchgear rooms.

MPN
ENW13283