Skip to main content
Schneider Electric FCE320100A100

Schneider FCE320100A100 PacDrive 3 encoder cable, 10 m

MPN FCE320100A100
Obsolete

Schneider Electric PacDrive 3 hybrid encoder cable, S615 to RJ45 straight, shielded, 10 m metal-jacketed, for Stainless LXM62-SC005_16mm drives.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

FCE320100A100 specifications
ParameterValue
Connector type1.0 x S615, straight shape 1.0 x RJ45
Main product or component typeEncoder cable
Cable length32.8 ft (10 m)
MaterialMetal

Product details

S615 to RJ45, shielded, 10 m — what the cable actually carries

The FCE320100A100 is a hybrid encoder cable in the PacDrive 3 line, terminated 1.0 x S615 straight on the drive end and 1.0 x RJ45 on the feedback side, built as a shielded assembly so the feedback pulses and any hybrid power conductors share one jacket without cross-talk into adjacent cabinet wiring. At 32.8 ft (10 m) it sits in the mid-length bracket for cabinet-to-machine routing on a Stainless LXM62-SC005_16mm servo axis — long enough to clear a typical food-grade stainless drive enclosure to the motor junction box without coiling excess, short enough to stay inside the encoder bandwidth budget where long shielded runs eat high-frequency feedback content.

PacDrive 3 fit and the Stainless LXM62-SC005_16mm target

The product description names the hybrid cable specifically for the Stainless LXM62-SC005_16mm variant of the LXM62 servo family, which places it in the washdown / hygienic segment of PacDrive 3 — the metal-jacketed construction and the straight S615 connector orientation suit routing out of a sealed stainless drive housing where right-angle exits would not clear the hygienic conduit entry. Because the cable carries both signal and hybrid power/communication on a single shielded loom, the S615 and RJ45 ends are not generic network parts — substituting a standard Cat5e RJ45 patch cord breaks the drive-end interface and the encoder return path.

Obsolete on the manufacturer's books — what that means for a BOM line

The part carries an Obsolete lifecycle status, so the original Schneider Electric production channel has closed and new-build demand is filled through independent surplus and broker stock — quoted per RFQ against the specific quantity the customer needs, not from a factory replenishment schedule.

MPN
FCE320100A100