Skip to main content
Schneider Electric GBX0400031003F

Schneider GBX0400031003F Planetary Gearbox, 3:1, 94% Eff

MPN GBX0400031003F
Obsolete

Schneider Electric GBX0400031003F planetary gearbox, straight teeth, 3:1 reduction ratio, 94% efficiency, 40 mm diameter, 24 arcmin backlash, 11 N.m torque.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

GBX0400031003F specifications
ParameterValue
Main product or component typePlanetary gearbox
Temp operating max90 °C
Temp operating min-25 °C
Housing materialBlack anodized aluminium
Efficiency94%
Max axial force fa n200 N 100 rpm, during 10000 hour at 30 °C 160 N 100 rpm, during 30000 hour at 30 °C
Max radial force fr n200 N 100 rpm, force applied at mid-distance from output shaft during 10000 hour at 30 °C 160 N 100 rpm, force applied at mid-distance from output shaft during 30000 hour at 30 °C

Product details

3:1 planetary stage — 94 % efficiency, 40 mm envelope

This GBX0400031003F is a 40 mm-diameter planetary gearbox with a 3:1 reduction ratio, straight-tooth gearing, and 94 % efficiency — the straight teeth trade a bit of noise for lower cost vs helical, and the efficiency figure tells you the thermal loss is low enough to skip forced cooling in most index-and-hold cycles. Maximum torsional backlash is 24 arcmin — a standard-grade figure for positioning where the load doesn't reverse under torque (pick-and-place, rotary indexing tables). Service life is 30,000 hours at 100 rpm and 30 °C, lubricated for life — no oil-change interval to schedule, but the life clock ticks faster above that speed or temperature.

Sourcing and lifecycle — obsolete, quoted to order

Sourced through independent distribution channels; quantities and condition (new-old-stock / pulls) confirmed at RFQ against your BOM line. No pin-compatible or bolt-in alternative is documented by Schneider — if you need a drop-in, the 40 mm flange and the 3:1 ratio are the dimensions to match against a current-series candidate.

Shaft loads and mounting — C 45 steel, black anodized housing

Maximum axial force is 200 N at 100 rpm for 10,000 hours at 30 °C, or 160 N for the full 30,000-hour life — same derating applies to radial force (200 N / 160 N, force applied at mid-span on the output shaft). Torsional rigidity is 1 N·m/arcmin — the wind-up under rated load is predictable enough for open-loop positioning, but a servo loop with encoder feedback would correct the residual compliance.

MPN
GBX0400031003F