Skip to main content
Schneider Electric GBX0400041404F

Schneider Electric GBX0400041404F Planetary Gearbox, 4:1

MPN GBX0400041404F
Obsolete

Schneider Electric GBX0400041404F planetary gearbox, straight teeth, 40 mm diameter, 4:1 reduction ratio, 15 N.m continuous torque, 94% efficiency, IP54 shaft output.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

GBX0400041404F specifications
ParameterValue
Main product or component typePlanetary gearbox
IP ratingIP54
Temp operating max90 °C
Temp operating min-25 °C
Housing materialBlack anodized aluminium
Efficiency94%
Max axial force fa n200 N 100 rpm, during 10000 hour at 30 °C 160 N 100 rpm, during 30000 hour at 30 °C
Max radial force fr n200 N 100 rpm, force applied at mid-distance from output shaft during 10000 hour at 30 °C 160 N 100 rpm, force applied at mid-distance from output shaft during 30000 hour at 30 °C

Product details

40 mm planetary gearbox with 4:1 reduction

The GBX0400041404F is a 40 mm diameter planetary gearbox from Schneider Electric's GBX series, offering a 4:1 reduction ratio in a straight-tooth configuration. It delivers 15 N.m continuous output torque at 100 rpm, with a maximum intermittent torque of 24 N.m under the same conditions. Rated efficiency sits at 94 %, meaning roughly 6 % of input power is lost as heat — relevant for thermal budgeting in a confined cabinet or when coupling to a servo motor near its thermal limit. The unit is lubricated for life and sealed to IP54 at the shaft output, so it handles dust and splash exposure without a regrease schedule.

Torque, backlash, and service life at rated speed

Continuous torque is 15 N.m at 100 rpm and 30 °C; the maximum output torque peaks at 24 N.m under the same conditions — useful for acceleration or momentary overloads during indexing moves. Maximum torsional backlash is 30 arc-minutes, which sets the positioning repeatability floor in open-loop applications. For a direct-drive indexing table, that backlash translates to about 0.5° of output slop — acceptable for conveyor positioning but not for precision rotary axes. Service life is rated at 30,000 hours at 100 rpm and 30 °C, dropping to 10,000 hours if axial or radial loads are pushed to the 200 N maximum. The radial force rating of 200 N is specified with the load applied at mid-distance on the output shaft. Torsional rigidity is 1 N.m/arcmin — a stiffness figure that governs windup under load. At 15 N.m continuous torque, expect about 15 arc-minutes of elastic deflection on top of the backlash.

Obsolete — sourcing through independent channels

Schneider Electric lists the GBX0400041404F as obsolete. Available through independent surplus and broker channels. Quantities are lot-specific and confirmed at RFQ — no stock-holding claim is made. The 40 mm diameter and 4:1 ratio are the critical fit dimensions; confirm the input shaft coupling and output bore before committing a BOM line.

MPN
GBX0400041404F