Skip to main content
Schneider Electric GC1620F6

Schneider GC1620F6 TeSys GC Modular Contactor, 2P, 110 VAC 6

MPN GC1620F6
Obsolete

Schneider Electric TeSys GC modular contactor, 2 poles, 110 V AC 60 Hz control, clip-on DIN rail mount, 1 x 18 mm module width.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

GC1620F6 key specifications
ParameterValue
Control typeRemote control
Control circuit typeAC at 60 Hz
Main product or component typeModular contactor
Voltage<= 250 V AC
Coil voltage110 V AC 60 Hz
Insulation voltage ui500 V conforming to IEC 61095 500 V conforming to VDE 0110
Current16 A AC-7 A 5 A AC-7B
Utilization categoryAC-7 A AC-7B
Temp storage max70 °C
Temp storage min-40 °C
Temp operating max50 °C
Temp operating min-5 °C

All specifications

GC1620F6 additional specifications
ParameterValue
Storage temperature-40...70 °C
ColorWhite
Depth62.5 mm
Width17.5 mm
Height81 mm
Electrical life cyclesAC-7 A: 100000 cycles AC-7B: 100000 cycles
Mechanical life cycles1000000 cycles
ApplicationHeating Motor control Lighting
Operating time10...25 ms opening 10...30 ms closing
Operating position30°/vertical
Operating temperature-5...50 °C

Product details

The Schneider Electric GC1620F6 is a TeSys GC modular contactor — a 2-pole, 110 V AC 60 Hz controlled switching device rated for AC-7A and AC-7B utilisation categories. That means it's built for motor starting, resistive heating, and lighting circuits, not just general-purpose resistive loads. The AC-7A rating covers inductive loads up to 16 A, while AC-7B handles motor loads with a rated breaking capacity of 40 A at 400 V per IEC 61095. The control circuit voltage limits are tight: dropout between 0.2 and 0.75 Uc, pick-up between 0.85 and 1.1 Uc at 50 Hz — verify your control transformer regulation if you're running near the edge.

Integration notes

Mounting is clip-on to a DIN rail; the contactor's 17.5 mm width and 81 mm height let it sit in a standard 18 mm module slot. Screw clamp terminals on both control and power circuits accept up to 6 mm² solid or flexible cable (power) and 2.5 mm² (control). Tightening torque is 0.8 N.m for both — no special tooling needed. The IP20 finger-safe rating (per VDE 0106) applies when mounted in an enclosure; the contactor itself is not sealed against washdown. Heat dissipation is 1.3 W at 50/60 Hz, and power dissipation per pole is 0.65 W. In a densely packed panel, that's low enough to skip forced cooling for most layouts, but check your thermal budget if you're grouping multiple contactors side by side at full rated current.

MPN
GC1620F6