Skip to main content
Schneider Electric GC2510M6

Schneider TeSys GC2510M6 Modular Contactor, 1P, 220-240V AC

MPN GC2510M6
Obsolete

Schneider Electric TeSys GC modular contactor, GC2510M6, 1-pole, 220-240 V AC 60 Hz coil, 17.5 mm width, clip-on DIN rail mount.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

GC2510M6 key specifications
ParameterValue
Control typeRemote control
Control circuit typeAC at 60 Hz
Main product or component typeModular contactor
Voltage<= 250 V AC
Coil voltage220...240 V AC 60 Hz
Insulation voltage ui500 V conforming to IEC 61095 500 V conforming to VDE 0110
Current25 A AC-7 A 8.5 A AC-7B
Breaking capacity68 A at 400 V for power circuit conforming to IEC 61095
Utilization categoryAC-7 A AC-7B
Temp storage max70 °C
Temp storage min-40 °C
Temp operating max50 °C

All specifications

GC2510M6 additional specifications
ParameterValue
Temp operating min-5 °C
Storage temperature-40...70 °C
ColorWhite
Depth62.5 mm
Width17.5 mm
Height81 mm
Electrical life cyclesAC-7 A: 100000 cycles AC-7B: 100000 cycles
Mechanical life cycles1000000 cycles
ApplicationHeating Motor control Lighting
Operating time10...25 ms opening 10...30 ms closing
Operating position30°/vertical
Operating temperature-5...50 °C

Product details

The Schneider Electric GC2510M6 is a TeSys GC modular contactor, a 1-pole device with a 220...240 V AC 60 Hz control circuit. It's a clip-on DIN rail unit, 17.5 mm wide, designed for switching resistive and lightly inductive loads in control panels. Rated for utilisation categories AC-7A and AC-7B, it's suited for heating, motor control, and lighting applications. The rated breaking and making capacity is 68 A at 400 V AC for the power circuit, per IEC 61095.

For a 1-pole device switching a single phase, this is the fault-clearing capability you need to check against your upstream protective device. The control circuit voltage is 220...240 V AC at 60 Hz, with a drop-out threshold of 0.2...0.75 Uc and an operational range of 0.85...1.1 Uc at 50 Hz. This means the coil will reliably pick up at 187 V and drop out below 48 V, which is important for brownout conditions or long control wiring runs. Electrical durability is rated at 100,000 cycles for both AC-7A and AC-7B categories, with mechanical durability at 1,000,000 cycles. The maximum operating rate is 300 cycles per hour at 50 °C. This is a moderate-duty contactor, not intended for high-speed cycling like a PLC output. The associated fuse rating is 25 A gL at ≤ 440 V for the power circuit. This is the maximum fuse size for short-circuit protection; the contactor itself is not a circuit breaker and relies on an upstream fuse or MCB. Heat dissipation is 1.3 W at 50/60 Hz, with 1.6 W per pole. In a crowded DIN rail enclosure, this is low enough to avoid derating concerns for adjacent devices, but still worth checking if you're packing 24 of these in a row.

Clip-on mounting on a DIN rail, occupying a single 18 mm module width (17.5 mm actual). The depth is 62.5 mm, height 81 mm. This is a standard panel footprint — fits alongside miniature circuit breakers and other modular DIN rail components. Screw clamp terminals on both control and power circuits, with a tightening torque of 0.8 N.m. Power circuit accepts up to 6 mm² flexible or solid wire; control circuit accepts up to 2.5 mm². The terminal layout is straightforward for a 1-pole device. IP20 protection (fingers) per VDE 0106, IP40 in an enclosure.

As an active, standard-line item, lead time is typically consistent with Schneider's distribution channel for TeSys GC components. No unusual sourcing constraints apply.

MPN
GC2510M6