Skip to main content
Schneider Electric GC2522B5

GC2522B5 TeSys GC Modular Contactor, 24V AC, 4P, Set of 6

MPN GC2522B5
Obsolete

Schneider Electric TeSys GC modular contactor, GC2522B5, 4P, 24 V AC 50 Hz, set of 6, clip-on DIN rail.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

GC2522B5 key specifications
ParameterValue
Control typeRemote control
Control circuit typeAC at 50 Hz
Main product or component typeModular contactor
Voltage<= 250 V AC
Coil voltage24 V AC 50 Hz
Insulation voltage ui500 V conforming to IEC 61095 500 V conforming to VDE 0110
Current25 A AC-7 A 8.5 A AC-7B
Breaking capacity68 A at 400 V for power circuit conforming to IEC 61095
Utilization categoryAC-7 A AC-7B
Temp storage max70 °C
Temp storage min-40 °C
Temp operating max50 °C

All specifications

GC2522B5 additional specifications
ParameterValue
Temp operating min-5 °C
Storage temperature-40...70 °C
ColorWhite
Depth62.5 mm
Width36 mm
Height85 mm
Electrical life cyclesAC-7 A: 100000 cycles AC-7B: 100000 cycles
Mechanical life cycles1000000 cycles
ApplicationMotor control Heating Lighting
Operating time10...25 ms opening 10...30 ms closing
Operating position30°/vertical
Operating temperature-5...50 °C

Product details

The GC2522B5 is a modular contactor from the Schneider Electric TeSys GC range — a 4-pole, 24 V AC 50 Hz coil unit rated for 25 A in the power circuit. It ships as a set of six, each clipping onto standard DIN rail. This is the kind of part you reach for when you need to switch motor, lighting, or heating loads in a panel and want the compact 2-module (36 mm wide) footprint.

The utilisation categories tell you what it's built for: AC-7A covers motor loads (think small pumps, fans, conveyors) and AC-7B covers resistive loads like lighting and heating. The electrical durability is rated at 100,000 cycles for both categories, with mechanical durability hitting 1,000,000 cycles — so it's not a throwaway part, but it's also not a high-cycle machine tool contactor. The rated breaking and making capacity of 68 A at 400 V (per IEC 61095) means it can handle short-circuit making and breaking up to that level, which is a good margin above the 25 A continuous rating. The control circuit is 24 V AC at 50 Hz, with a drop-out range of 0.2 to 0.75 Uc and an operational range of 0.85 to 1.1 Uc — so it drops out reliably below about 18 V and picks up cleanly above 20.4 V. Heat dissipation is 1.6 W per pole at 50/60 Hz, so four poles running full-tilt dump about 6.4 W into the enclosure — factor that into your thermal budget if you're packing a dense row of these.

The screw clamp terminals accept up to 6 mm² solid or flexible on the power circuit, and 2.5 mm² on the control circuit. Tightening torque is 0.8 N.m for both — don't over-crank it. Operating position is 30° from vertical, so you can tilt it slightly if the panel layout demands it, but keep it close to upright for reliable operation.

MPN
GC2522B5