Skip to main content
Schneider Electric ILM1001P21A0000

Schneider Electric ILM1001P21A0000 servo motor, 600 W

MPN ILM1001P21A0000
Active

Schneider Electric ILM1001P21A0000, PacDrive 3 ILM-series servo motor integrated drive, 600 W, 16.8 lbf.in nominal torque, IP65, international standard flange.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ILM1001P21A0000 specifications
ParameterValue
Shaft end typeUntapped
Main product or component typeServo motor integrated drive
IP ratingIP65
Length8.5 in (215 mm)
Shaft diameter0.7 in (19 mm)
Max axial force fa n0.2 x Fr
Max radial force fr n900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm
Centring collar diameter3.7 in (95 mm)

Product details

PacDrive 3 ILM motor — what the part is

The Schneider Electric ILM1001P21A0000 is a servo motor integrated drive in the PacDrive 3 family, sized at 100 mm flange with an international standard flange mount. It packages the drive electronics into the motor housing, so the cabinet-side controller sees a single cable and a single motor object rather than a separate drive and motor pair.

Ratings that decide the fit

Nominal output is 600 W at 3000 rpm, with a nominal torque of 16.8 lbf.in — the combination is what an integrator reads off the torque/speed curve to confirm the motor will hold the load across the operating speed range without slipping into the continuous-stall region. Line current sits at 1.4 A nominal with a continuous stall current of 1.8 A; the maximum Irms ceiling is 7.4 A, and the torque constant is 1.39 N.m/A at 120 °C — so any drive paired with this motor must source up to that Irms without saturating, and the torque-loop gain scales directly off the per-amp constant at operating temperature. Peak stall torque is 85.0 lbf.in, the figure an integrator reads for short-term overload margin on acceleration ramps.

Mounting geometry and shaft loads

Overall length is 8.5 in (215 mm), key width 1.2 in (30 mm), shaft length 1.6 in (40 mm), and shaft diameter 0.7 in (19 mm) with an untapped shaft end — flange-mounted on a 100 mm face with four 0.4 in (9 mm) mounting holes and a centring collar at 3.7 in (95 mm) diameter by 0.1 in (3.5 mm) deep. Maximum radial load is 900 N at 1000 rpm stepping down to 630 N at 3000 rpm; maximum axial force is 0.2 × radial — the radial figure is what most belts and direct-coupled gearboxes design against, not the headline torque.

Environment, cooling and sealing

Cooling is natural convection — no integrated fan, so the cabinet or machine-frame attachment must reject the I²R loss to the surrounding structure rather than to airflow. Sealing is IP65, which closes the gap against dust ingress and water jets, but rules out submerged or high-pressure washdown duty without an external cover.

Sourcing posture

No price, stock count, lead-time figure or authorisation claim is asserted on-page; those come back with the quote on the RFQ.

MPN
ILM1001P21A0000