Skip to main content
Schneider Electric ILM1401M12A0000

Schneider ILM1401M12A0000 PacDrive 3 Servo Motor, 1300 W

MPN ILM1401M12A0000
Active

Schneider Electric ILM1401M12A0000, PacDrive 3 series ILM integrated servo motor, 8.3 N.m nominal, 27 N.m peak, 1300 W, keyed shaft, IP54, Hiperface feedback.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ILM1401M12A0000 specifications
ParameterValue
Feedback typeAbsolute multiturn SinCos Hiperface
Shaft end typeKeyed
Main product or component typeServo motor integrated drive
IP ratingIP54
Length10 in (254 mm)
Shaft diameter0.9 in (24 mm)
Max axial force fa n0.2 x Fr
Max radial force fr n2210 N 1000 rpm 1760 N 2000 rpm
Centring collar diameter5.1 in (130 mm)

Product details

Lifecycle status — still in production, quoted to order

The part's lifecycle stage reads as current on the OEM record, so the ILM1401M12A0000 is on the active Schneider Electric line for the PacDrive 3 family and is specified against current production drives rather than legacy stock. Procurement posture for an active PacDrive 3 motor is quoted-to-order against the BOM — the part is not held as a stocked shelf item here, and lead time plus volume pricing come back through an RFQ rather than off a live inventory feed.

Torque envelope and where this motor slots in a PacDrive 3 line

The motor carries 8.3 N.m nominal torque (75.2 lbf.in continuous stall) with 27 N.m peak stall — that ratio is what dictates the load class the ILM1401M12A0000 can accelerate on a PacDrive 3 axis, and it lands in the mid-power bracket for handling, pick-and-place, and small-format converting machinery. At 1300 W nominal output and 3.15 A line-rated current against a 14.6 A Irms peak, the motor runs comfortably in the AC servo mid-band — sizing the upstream drive means matching the Irms ceiling to the motor's instantaneous demand rather than the 1300 W continuous figure.

Drive tuning — constants, inertia, and the feedback bus

Stator resistance of 4.58 Ohm per phase at 20 °C dropping to 3.18 Ohm per phase-to-neutral at 120 °C tells the thermal headroom story — copper drops with temperature, so loop gains are programmed against the 120 °C figure, not the cold bench reading. Feedback is absolute multiturn SinCos Hiperface with 128 periods of resolution, which is what the PacDrive 3 controller expects for commutation and absolute position retention at power-on without a homing move.

Mechanical fit — flange, shaft, and shaft loading

Mounting is the international standard 140 mm flange with a 130 mm centring collar and four 11 mm bolt holes, so the ILM1401M12A0000 drops into the standard PacDrive 3 footprint without a custom adapter plate. The shaft is 24 mm diameter, 50 mm long, keyed with a 1.6 in key width and no second shaft end — coupling selection has to match 24 mm keyed, not the plain-cylindrical or alternative keyway variants in the same series. Shaft loading limits are 2210 N radial at 1000 rpm derating to 1760 N at 2000 rpm, with axial force capped at 0.2 × radial — those curves decide belt tension, gear pinion loads, and whether a direct-drive coupling sits inside the envelope.

Cabinet duty and cooling

Cooling is natural convection only — no integrated fan — which means cabinet ventilation and a heatsinking coupling or machine frame do the thermal work, and IP54 sealing limits the environment to dust-protected and light splash rather than washdown.

MPN
ILM1401M12A0000