Skip to main content
Schneider Electric ILM1402P22A0000

Schneider Electric ILM1402P22A0000 Servo Motor, 9.1 N.m

MPN ILM1402P22A0000
Active

Schneider Electric PacDrive 3 ILM servo motor integrated drive, 9.1 N.m nominal torque, 1910 W, 2000 rpm, 140 mm flange, IP65, absolute multiturn SinCos Hiperface feedback.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ILM1402P22A0000 specifications
ParameterValue
Feedback typeAbsolute multiturn SinCos Hiperface
Shaft end typeUntapped
Main product or component typeServo motor integrated drive
IP ratingIP65
Length12.2 in (309 mm)
Shaft diameter0.9 in (24 mm)
Max axial force fa n0.2 x Fr
Max radial force fr n2430 N 1000 rpm 1930 N 2000 rpm
Centring collar diameter5.1 in (130 mm)

Product details

ILM servo motor integrated drive in the PacDrive 3 line

The ILM1402P22A0000 is a Schneider Electric servo motor integrated drive from the PacDrive 3 range, device short name ILM. It packages the drive electronics onto the motor frame, so the controller slice in the cabinet is replaced by a single motor-and-drive module on the machine — the loop is closed back to the PacDrive controller over the fieldbus rather than a dedicated analogue torque/velocity cable. It is a 140 mm flange size motor with international standard flange mounting and natural convection cooling, which means the integrated drive electronics rely on the motor housing as the heatsink — no external fan, so the cabinet face must still allow air movement around the body.

Torque envelope — nominal, peak, and continuous stall

Nominal torque is 9.1 N.m at 2000 rpm, drawing 3.7 A line current and delivering 1910 W of nominal output power. The 4.8 A continuous stall current and 12.5 N.m continuous stall torque are the thermal ceiling at zero speed — the rating that decides whether the machine can hold a stationary load indefinitely without tripping on I²t. Peak stall torque is 55 N.m with a maximum Irms of 24 A — the headroom used for acceleration ramps and short shock loads. In sizing terms, the 6:1 ratio between peak stall and nominal is what lets a packaging indexing axis accelerate a heavy puck without oversizing the continuous-rated motor; if the cycle demands peak torque more than a few seconds at a time, the continuous figure starts to govern instead.

Feedback, poles, and winding constants

Position feedback is absolute multiturn SinCos Hiperface with 128 periods of resolution per revolution, on a 10-pole rotor. Absolute multiturn means the absolute position survives a power cycle — no homing routine on every restart — and Hiperface SinCos carries the analogue incremental channels that the drive uses for fine interpolation between absolute singleturn frames. Back-EMF constant is 173 V/krpm at 20 °C and torque constant 2.6 N.m/A at 120 °C — the drop between the 20 °C cold figure and the 120 °C working figure is the normal magnet-flux temperature loss that the drive compensates with the motor model. Stator winding resistance is 1.9 Ω phase-to-phase at 20 °C and 1.32 Ω phase-to-neutral at 120 °C; the phase-to-phase inductance is 22 mH at 20 °C and 11 mH at 120 °C, which sets the current-loop bandwidth the drive can achieve.

Mechanical envelope and shaft loading

The motor body is 309 mm long with a 40 mm key width, and the untaped shaft is 24 mm diameter by 50 mm long — sized for a standard coupling or pulley in a packaging or indexing application. Four 11 mm mounting holes on a 140 mm international-standard flange with a 130 mm centring collar at 3.5 mm depth match the standard servo mounting footprint. The motor is supplied without a holding brake and without a second shaft end, which simplifies the mechanical stack but means the axis must rely on the drive's regenerative stop or an external mechanical brake if the application holds a vertical load at rest. The IP65 rating seals against hose-directed water and dust, suitable for food-and-beverage washdown zones and general factory environments but not for submerged duty.

MPN
ILM1402P22A0000