Skip to main content
Schneider Electric LX0FG012

TeSys LX0FG012 Contactor Coil, 440 V AC, 50/60 Hz

MPN LX0FG012
Obsolete

TeSys F, contactor coil, LX0FG012, 440 V AC 50/60 Hz, 35-40 ms latching, 106.1 Ohm latching coil resistance.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX0FG012 specifications
ParameterValue
Control circuit typeAC 50/60 Hz
Main product or component typeContactor coil
Coil voltage440 V AC 50/60 Hz
Mechanical life cycles1 Mcycles
Operating time35...40 ms latching 50...100 ms unlatching

Product details

Contactor Coil for TeSys F — LX0FG012

It's the replacement coil for the corresponding TeSys F contactor frame, meaning if you've got a contactor in that line with a failed or wrong-voltage coil, this is the drop-in swap. Latching time runs 35 to 40 ms; unlatching is slower at 50 to 100 ms — that asymmetry matters when you're timing a sequence or coordinating with a PLC scan cycle. Coil resistance at 20 °C is 106.1 Ohm for the latching winding and 8126 Ohm for the unlatching winding. That's a big ratio — the hold-in current is much lower than the pick-up, which is standard for a dual-winding AC coil, but it means your control transformer sizing needs to cover the inrush, not just the sealed VA.

No minimum buy-in required for a single unit, but if you're stocking multiple TeSys F frames, it makes sense to consolidate the coil order with the contactors.

Mechanical Endurance & Duty Cycle

Rated for 1 million mechanical cycles — that's the contactor frame's life, not the coil's alone, but the coil is the wear item. At a maximum operating rate of 120 cycles per hour at 40 °C, you're looking at roughly 8,333 hours of continuous cycling before mechanical end-of-life. For a conveyor line running 10 cycles per minute, that's about 14 days of 24/7 operation — so for high-duty applications, budget a spare.

MPN
LX0FG012