Skip to main content
Schneider Electric LX1FH0302

Schneider Electric LX1FH0302 TeSys Contactor Coil, 30 V AC

MPN LX1FH0302
Active

Schneider Electric TeSys LX1FH0302 contactor coil, 30 V AC 40-400 Hz, 8 W dissipation, 100-170 ms opening time.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX1FH0302 specifications
ParameterValue
Control circuit typeAC 40...400 Hz
Main product or component typeContactor coil
Coil voltage30 V AC 40...400 Hz
Temp operating max55 °C
Temp operating min-5 °C
Operating time100...170 ms opening 40...65 ms closing
Operating temperature23...131 °F (-5...55 °C)

Product details

It operates on a 30 V AC control circuit at 40-400 Hz, drawing 8 W of heat dissipation at steady state. Opening time spans 100-170 ms, closing time 40-65 ms, which sets the mechanical response window for the contactor it drives. The coil lacks a built-in suppressor module, so an external RC snubber or varistor is needed across the coil terminals if driving inductive loads or if the PLC output card requires suppression.

Control voltage limits and thermal derating

The coil holds in at 85-110% of rated Uc (25.5-33 V AC) and drops out between 35-55% of Uc (10.5-16.5 V AC) at 55 °C ambient. This dropout margin is generous — the contactor stays sealed through brownout conditions down to roughly 17 V AC, which matters for installations on long cable runs or shared control transformers. Maximum operating rate is 2400 cycles per hour at 55 °C, so continuous high-speed cycling (e.g., resistance welding or fast indexing) stays within the thermal limit. The 8 W dissipation figure is at rated voltage and frequency; panel builders should account for this when sizing enclosure ventilation, especially in sealed cabinets.

The TeSys range is widely stocked across the distribution network, so lead times are typically short for this active, non-obsolete part.

MPN
LX1FH0302